[U-Boot] [PATCH 0/3] i2c: improve s3c24x0 with High-speed and new SYS_I2C framework support

[Heiko Schocher <hs@denx.de>]

Hello Naveen,

Am 30.09.2013 08:58, schrieb Naveen Krishna Chatradhi:
> This patchset fixes few bugs in the existing s3c24x0.c code (standard i2c)
> and add support for High-speed i2c bus controller available on Exynos5 SoCs
> from Samsung.
>
> Exynos5250 channels [0 ~ 3] can configured for I2C contoller or
>             new HSI2C controller
>             channels [3 ~ 7] are standard I2C controller channels
> Exynos5420 channels [0 ~ 3] are standard I2C controller channels and
>             channels [4 ~ 10] are High-speed controller channels
>
> Patchset:
> 1.  exynos: i2c: Fix i2c driver to handle NACKs properly
>      Improvements and fixes from Vadim Bendebury for standard i2c calls
>
> 2.  exynos: i2c: Change FDT bus setup code to enumerate ports correctly
>      FDT bus setup code from Simon Glass
>
> 3.  PATCH v5: i2c: s3c24xx: add hsi2c controller support
>      High-speed controller register description and defines new i2c read/write,
>      probe and set_bus calls.
>
>      This is been reviewed earlier at
>      http://lists.denx.de/pipermail/u-boot/2013-May/153245.html
>      Thanks for review and improvements from Vadim Bendebury.
>
> Question:
> 4. RFC: samsung: i2c: Enable new CONFIG_SYS_I2C framework
> I've tried to implement the new I2C multi bus framework in u-boot tree,
> taking tegra-i2c.c as reference.
>
> a). We have different number of channels on Exynos5250 and Exynos5420
>     (as explained above). How are we supposed to define the U_BOOT_I2C_ADAP_COMPLETE
>     in such cases. Can i use #ifdef EXYNOS5420 or EXYNOS5250

 From my side, Yes.

> b). When i define 11 buses as in the case of Exynos5420, the "i2c bus" lists them
>   SMDK5420 # i2c bus
>   Bus 0:  s3c0
>   Bus 1:  s3c1
>   Bus 2:  s3c10
>   Bus 3:  s3c2
>   Bus 4:  s3c3
>   Bus 5:  s3c4
>   Bus 6:  s3c5
>   Bus 7:  s3c6
>   Bus 8:  s3c7
>   Bus 9:  s3c8
>   Bus 10: s3c9
>   or  (If i change the name to hsi2c)
>   SMDK5420 # i2c bus
>   Bus 0:  hsi2c10
>   Bus 1:  hsi2c4
>   Bus 2:  hsi2c5
>   Bus 3:  hsi2c6
>   Bus 4:  hsi2c7
>   Bus 5:  hsi2c8
>   Bus 6:  hsi2c9
>   Bus 7:  s3c0
>   Bus 8:  s3c1
>   Bus 9:  s3c2
>   Bus 10: s3c3
>
> Whats the expected behaviour. If the above result is correct, I need to changei
> the strings to get them in the correct order.

What, if you use two digits:

   Bus 0:  hsi2c01
   Bus 1:  hsi2c02
   [...]
   Bus 7:  s3c00
   Bus 8:  s3c01
   [...]

?

Or with one digit:

   Bus 0:  hsi2c1
   Bus 1:  hsi2c2
   [...]
   Bus 7:  s3c0
   Bus 8:  s3c1
   [...]

> c). What's the alternative for the
>     board_i2c_init(), i2c_get_bus_num_fdt(), i2c_reset_port_fdt().
>    "Functions to get the I2C bus number and reset I2C bus using FDT node"
>
>     I think, these functions are still needed.

Hmm.. that needs a general discussion, how to use fdt and i2c I think.

I would prefer a way (not really nowing, if it is possible for all
configurations) where, if using fdt, the DT gets parsed and the
availiable i2c buses gets created ... After that, "normal" i2c access
with i2c_set_bus_num(), i2c_read/write should be possible ... this is
currently not possible with the i2c framework, but should not be so hard
to do. Except the restriction, that it would not work in SPL case, or
before relocation for i2c buses announced through dt

Define CONFIG_SYS_I2C_MAX_HOPS -> CONFIG_SYS_I2C_DIRECT_BUS is not defined
so i2c_bus[] is used in drivers/i2c/i2c_core.c. Define the fix i2c buses in
the board config file with CONFIG_SYS_I2C_BUSES (if you have no fix buses,
let this empty) and add a function in drivers/i2c/i2c_core.c, which adds
new i2c buses to i2c_bus[] after the fix buses and call this new function,
from where you interpret the fdt ...

int i2c_get_bus_num_fdt(int node) should be integrated to drivers/i2c/i2c_core.c

For what purpose is i2c_reset_port_fdt() ?

bye,
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany