From: Sourav Poddar <sourav.poddar@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [UBOOT][PATCHv3 0/7] mtd/spi: add quad/memory mapped read support, add ti qspi controller.
Date: Thu, 3 Oct 2013 23:55:33 +0530 [thread overview]
Message-ID: <524DB69D.5070806@ti.com> (raw)
In-Reply-To: <CAD6G_RS=up7Kjd7O26QCveFTMYkjb--AaeR4gMrPDe661=_uyw@mail.gmail.com>
On Thursday 03 October 2013 11:13 PM, Jagan Teki wrote:
> Hi Sourav,
>
> Can you rebase your changes w.r.t u-boot-spi.git with master-probe branch.
> Sorry for the delay, try to send the patches without quad related stuff.
>
Ok. I will rebase and send only ti qspi and memory mapped part.
> I will prepare a thread for this quad after this release as we did lot
> of work last few months back.
> Thanks for your help.!!!
>
Ok.
> On Wed, Sep 18, 2013 at 5:51 PM, Sourav Poddar<sourav.poddar@ti.com> wrote:
>> This patch series add support for TI qspi controller and in the process also
>> add support for quad read and memory mapped read
>> in mtd spi framework.
>>
>> Testing details:
>> Did a boot from qspi mode on DRA7xx.
>> Testing details present in the last patch of
>> the series.
>>
>> Currently, TI qpsi controller supports only 16MB access.
>> Access for higher MB area will be added later.
>>
>> v2->v3:
>> 1. run checkpatch
>> 2. Rearrange the code logically.
>> 3. Remove a page read hack.
>>
>> Matt Porter (3):
>> omap5: add qspi support
>> spi: add TI QSPI driver
>> dra7xx_evm: add SPL API, QSPI, and serial flash support
>>
>> Ravikumar Kattekola (1):
>> drivers: mtd: :spi: Add quad read support
>>
>> Sourav Poddar (3):
>> armv7: hw_data: change clock divider setting.
>> driver: mtd: spi: Add memory mapped read support
>> README: qspi usecase and testing documentation.
>>
>> arch/arm/cpu/armv7/omap5/hw_data.c | 10 +-
>> arch/arm/cpu/armv7/omap5/prcm-regs.c | 1 +
>> arch/arm/include/asm/arch-omap5/omap.h | 3 +
>> arch/arm/include/asm/arch-omap5/spl.h | 1 +
>> arch/arm/include/asm/omap_common.h | 1 +
>> board/ti/dra7xx/mux_data.h | 10 +
>> doc/README.ti_qspi_dra_test | 38 ++++
>> doc/README.ti_qspi_flash | 47 +++++
>> drivers/mtd/spi/spansion.c | 1 +
>> drivers/mtd/spi/spi_flash.c | 113 +++++++++++-
>> drivers/mtd/spi/spi_flash_internal.h | 2 +
>> drivers/spi/Makefile | 1 +
>> drivers/spi/ti_qspi.c | 324 ++++++++++++++++++++++++++++++++
>> include/configs/dra7xx_evm.h | 20 ++
>> include/spi.h | 5 +
>> 15 files changed, 575 insertions(+), 2 deletions(-)
>> create mode 100644 doc/README.ti_qspi_dra_test
>> create mode 100644 doc/README.ti_qspi_flash
>> create mode 100644 drivers/spi/ti_qspi.c
>>
>> _______________________________________________
>> U-Boot mailing list
>> U-Boot at lists.denx.de
>> http://lists.denx.de/mailman/listinfo/u-boot
>
>
next prev parent reply other threads:[~2013-10-03 18:25 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-18 12:21 [U-Boot] [UBOOT][PATCHv3 0/7] mtd/spi: add quad/memory mapped read support, add ti qspi controller Sourav Poddar
2013-09-18 12:21 ` [U-Boot] [UBOOT][PATCHv3 1/7] omap5: add qspi support Sourav Poddar
2013-09-18 12:21 ` [U-Boot] [UBOOT][PATCHv3 2/7] armv7: hw_data: change clock divider setting Sourav Poddar
2013-09-18 12:21 ` [U-Boot] [UBOOT][PATCHv3 3/7] drivers: mtd: :spi: Add quad read support Sourav Poddar
2013-09-18 12:21 ` [U-Boot] [UBOOT][PATCHv3 4/7] driver: mtd: spi: Add memory mapped " Sourav Poddar
2013-09-18 12:21 ` [U-Boot] [UBOOT][PATCHv3 5/7] spi: add TI QSPI driver Sourav Poddar
2013-09-20 2:51 ` Nobuhiro Iwamatsu
2013-10-03 17:49 ` Jagan Teki
2013-10-03 18:26 ` Sourav Poddar
2013-09-18 12:21 ` [U-Boot] [UBOOT][PATCHv3 6/7] dra7xx_evm: add SPL API, QSPI, and serial flash support Sourav Poddar
2013-09-18 12:21 ` [U-Boot] [UBOOT][PATCHv3 7/7] README: qspi usecase and testing documentation Sourav Poddar
2013-10-03 17:43 ` [U-Boot] [UBOOT][PATCHv3 0/7] mtd/spi: add quad/memory mapped read support, add ti qspi controller Jagan Teki
2013-10-03 18:25 ` Sourav Poddar [this message]
2013-10-03 18:26 ` Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=524DB69D.5070806@ti.com \
--to=sourav.poddar@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox