[U-Boot] u-boot-xlnx 'master-next' branch: usb not working for microzed

[Michal Simek <monstr@monstr.eu>]

On 10/16/2013 08:18 AM, Oleg Dzhimiev wrote:
> Thanks to Michal - in the u-boot-xlnx/master-next (vs /master) the following
> lines were removed:
> board/xilinx/zynq/board.c:
> -	/* temporary hack to take USB out of reset til the is fixed
> -	 * in Linux
> -	 */
> -	writel(0x80, 0xe000a204);
> -	writel(0x80, 0xe000a208);
> -	writel(0x80, 0xe000a040);
> -	writel(0x00, 0xe000a040);
> -	writel(0x80, 0xe000a040);
> 
> This is board-specific (but the same for zedboard & microzed) USB reset
> wired to MIO7. Without these lines USB reset stays active.

Please keep this discussion out of mainline u-boot because it has
nothing to do with the code in the mainline.

I will send you separate email about this.

Thanks,
Michal

-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform


-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 263 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131016/8e12c127/attachment.pgp>