From mboxrd@z Thu Jan 1 00:00:00 1970 From: Heiko Schocher Date: Wed, 16 Oct 2013 09:58:53 +0200 Subject: [U-Boot] [PATCH v8 0/2] I2C: Zynq In-Reply-To: References: Message-ID: <525E473D.1090507@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello Michael, Am 15.10.2013 22:23, schrieb Michael Burr: > This series of two patches contains improvements for the I2C driver on the > Xilinx Zynq architecture. In general, the goals are: >> Support for both I2C bus masters ("I2C0" and "I2C1") in the Zynq PS. >> Full support for bus multiplexers. >> Support for all register-address sizes (0, 1, 2). > > The changes to file 'zynq_i2c.c' in this patch series are > meant to be applied in order: in other words, first apply the > changes from the PATCH 1/2 version; then apply the changes in the > PATCH 2/2 version. > > v3: fixed mistake parsing PATCH 1/2 > v4: _really_ fixed this time! > v5: yet another try > v6: one more time > v7: again > v8: last time (see comments in PATCH 1/2) ? I am lost in space now ... you are sure this is the finally version? Really tested? I have no chance to test your changes ... bye, Heiko -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany