From mboxrd@z Thu Jan 1 00:00:00 1970 From: Michal Simek Date: Wed, 16 Oct 2013 11:11:23 +0200 Subject: [U-Boot] [PATCH v8 1/2] I2C: Zynq: Support for 0-length register address In-Reply-To: <525E4D3A.3080702@denx.de> References: <37a15583554f2200be52342511e402b90c9de0eb.1381867974.git.michael.burr@logicpd.com> <525E4D3A.3080702@denx.de> Message-ID: <525E583B.6040701@monstr.eu> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 10/16/2013 10:24 AM, Heiko Schocher wrote: > Hello Michael, > > Am 15.10.2013 22:23, schrieb Michael Burr: >>> Fixed bug with alen == 0 in 'i2c_write', 'i2c_read' >> Further minor corrections: >>> Write 'address' register before 'data' register. >>> Write 'transfer_size' register before 'address' register. >> >> Signed-off-by: Michael Burr >> Cc: Heiko Schocher >> Cc: Michal Simek >> >> --- >> Tested: >> Xilinx ZC702 eval board. >> Write and read registers with addresses of length 0 and 1. >> >> Change history: >>> v2: put this in a series instead of by itself >>> v3: fixed formatting problem in patch message >>> v4: _really_ fixed this time! >>> v5: yet another try >>> v6: one more time >>> v7: again >> > v8: After trying many times, I cannot get Patchwork to properly understand the diff in this message. As a workaround, please accept the diff in my patch of 2013-09-24, titled "[U-Boot] I2C: Zynq: Support for 0-length register address", which is 100% >> equivalent to the patch in this message (1/2). It should still be applied before the patch in the second message (2/2). > > Hmm.. please try to post a correct version of this patch, as I not > really want to search the correct patch ... I am sure I will pick up > the wrong version and I cannot test anything. > > Thanks! > > Hmm.. if you have problems with your commit message, you can reedit > it: > - get the commit id before your commit you want to edit > - "git rebase -i commit-id" > -> you get a list of commits, see for help maybe here: > https://help.github.com/articles/interactive-rebase > > Please remove the ">" in your commit message ... maybe this confuses > patchwork ... Albert is right. Just use patman -n to see your patches to get it done correctly and then just use patman for sending. There is nice README which describes everything what you need. Thanks, Michal -- Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/ Maintainer of Linux kernel - Xilinx Zynq ARM architecture Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 263 bytes Desc: OpenPGP digital signature URL: