From mboxrd@z Thu Jan 1 00:00:00 1970 From: Heiko Schocher Date: Thu, 17 Oct 2013 13:11:39 +0200 Subject: [U-Boot] [PATCH v8 0/2] I2C: Zynq In-Reply-To: References: <525E473D.1090507@denx.de> Message-ID: <525FC5EB.7030606@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello Jagan, Am 17.10.2013 12:43, schrieb Jagan Teki: > Hi Michael, > > On Wed, Oct 16, 2013 at 1:28 PM, Heiko Schocher wrote: >> Hello Michael, >> >> Am 15.10.2013 22:23, schrieb Michael Burr: >> >>> This series of two patches contains improvements for the I2C driver on the >>> Xilinx Zynq architecture. In general, the goals are: >>>> >>>> Support for both I2C bus masters ("I2C0" and "I2C1") in the Zynq PS. >>>> Full support for bus multiplexers. >>>> Support for all register-address sizes (0, 1, 2). >>> >>> >>> The changes to file 'zynq_i2c.c' in this patch series are >>> meant to be applied in order: in other words, first apply the >>> changes from the PATCH 1/2 version; then apply the changes in the >>> PATCH 2/2 version. >>> >>> v3: fixed mistake parsing PATCH 1/2 >>> v4: _really_ fixed this time! >>> v5: yet another try >>> v6: one more time >>> v7: again >>> v8: last time (see comments in PATCH 1/2) >> >> >> ? I am lost in space now ... you are sure this is the finally version? >> Really tested? I have no chance to test your changes ... > > Just confused this style of sending patches. > Anyway I have tested on these on zynq boards, works fine. Thanks for testing! bye, Heiko -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany