* [U-Boot] v2013.10 failed build with jffs2 cmd
@ 2013-10-22 2:15 Chris Ruehl
[not found] ` <20131022060753.9F8EB380A62@gemini.denx.de>
0 siblings, 1 reply; 5+ messages in thread
From: Chris Ruehl @ 2013-10-22 2:15 UTC (permalink / raw)
To: u-boot
Dear List,
when I tried to build v2013.10 with the Option: CONFIG_CMD_JFFS2
using linao tool-chain 2013.09 (and earlier) I run into the well known problem
uses VFP register arguments, u-boot does not
the u-boot.map shows this as source of the trouble -
/opt/armhf/gcc-linaro-arm-linux-gnueabihf-4.8-2013.09_linux/bin/../lib/gcc/arm-linux-gnueabihf/4.8.2/libgcc.a(_aeabi_uldivmod.o)
fs/jffs2/libjffs2.o (__aeabi_uldivmod)
/opt/armhf/gcc-linaro-arm-linux-gnueabihf-4.8-2013.09_linux/bin/../lib/gcc/arm-linux-gnueabihf/4.8.2/libgcc.a(_dvmd_lnx.o)
/opt/armhf/gcc-linaro-arm-linux-gnueabihf-4.8-2013.09_linux/bin/../lib/gcc/arm-linux-gnueabihf/4.8.2/libgcc.a(_udivsi3.o)
(__aeabi_idiv0)
/opt/armhf/gcc-linaro-arm-linux-gnueabihf-4.8-2013.09_linux/bin/../lib/gcc/arm-linux-gnueabihf/4.8.2/libgcc.a(bpabi.o)
/opt/armhf/gcc-linaro-arm-linux-gnueabihf-4.8-2013.09_linux/bin/../lib/gcc/arm-linux-gnueabihf/4.8.2/libgcc.a(_aeabi_uldivmod.o)
(__gnu_uldivmod_helper)
/opt/armhf/gcc-linaro-arm-linux-gnueabihf-4.8-2013.09_linux/bin/../lib/gcc/arm-linux-gnueabihf/4.8.2/libgcc.a(_divdi3.o)
/opt/armhf/gcc-linaro-arm-linux-gnueabihf-4.8-2013.09_linux/bin/../lib/gcc/arm-linux-gnueabihf/4.8.2/libgcc.a(bpabi.o)
(__divdi3)
/opt/armhf/gcc-linaro-arm-linux-gnueabihf-4.8-2013.09_linux/bin/../lib/gcc/arm-linux-gnueabihf/4.8.2/libgcc.a(_udivdi3.o)
/opt/armhf/gcc-linaro-arm-linux-gnueabihf-4.8-2013.09_linux/bin/../lib/gcc/arm-linux-gnueabihf/4.8.2/libgcc.a(bpabi.o)
(__udivdi3)
any hints to solve this?
Chris
^ permalink raw reply [flat|nested] 5+ messages in thread* [U-Boot] v2013.10 failed build with jffs2 cmd
@ 2013-10-22 12:13 Wolfgang Denk
2013-10-23 0:36 ` Chris Ruehl
0 siblings, 1 reply; 5+ messages in thread
From: Wolfgang Denk @ 2013-10-22 12:13 UTC (permalink / raw)
To: u-boot
Dear Chris Ruehl,
I wrote:
> If everything else fails, use "USE_PRIVATE_LIBGCC=y" on the make
> command line.
I mean: use "USE_PRIVATE_LIBGCC=yes" on the make command line.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The human race is a race of cowards; and I am not only marching in
that procession but carrying a banner. - Mark Twain
^ permalink raw reply [flat|nested] 5+ messages in thread
* [U-Boot] v2013.10 failed build with jffs2 cmd
2013-10-22 12:13 Wolfgang Denk
@ 2013-10-23 0:36 ` Chris Ruehl
2013-10-23 1:44 ` Chris Ruehl
0 siblings, 1 reply; 5+ messages in thread
From: Chris Ruehl @ 2013-10-23 0:36 UTC (permalink / raw)
To: u-boot
Hi Wolfgang,
On Tuesday, October 22, 2013 08:13 PM, Wolfgang Denk wrote:
> Dear Chris Ruehl,
>
> I wrote:
>
>> If everything else fails, use "USE_PRIVATE_LIBGCC=y" on the make
>> command line.
>
> I mean: use "USE_PRIVATE_LIBGCC=yes" on the make command line.
after I set this option the build failed for
/uboot.d/u-boot-git/arch/arm/lib/libgcc.o -Map u-boot.map -o u-boot
fs/jffs2/libjffs2.o: In function `jffs2_1pass_build_lists':
/opt/cross_build/uboot.d/u-boot-git/fs/jffs2/jffs2_1pass.c:1441: undefined
reference to `__aeabi_uldivmod'
I mentioned this reference as "root of the evil" before :-)
Chris
>
>
> Best regards,
>
> Wolfgang Denk
>
--
GTSYS Limited RFID Technology
A01 24/F Gold King Industrial Bld
35-41 Tai Lin Pai Road, Kwai Chung, Hong Kong
Fax (852) 8167 4060 - Tel (852) 3598 9488
Disclaimer: http://www.gtsys.com.hk/email/classified.html
^ permalink raw reply [flat|nested] 5+ messages in thread
* [U-Boot] v2013.10 failed build with jffs2 cmd
2013-10-23 0:36 ` Chris Ruehl
@ 2013-10-23 1:44 ` Chris Ruehl
0 siblings, 0 replies; 5+ messages in thread
From: Chris Ruehl @ 2013-10-23 1:44 UTC (permalink / raw)
To: u-boot
FYI
On Wednesday, October 23, 2013 08:36 AM, Chris Ruehl wrote:
> Hi Wolfgang,
>
> On Tuesday, October 22, 2013 08:13 PM, Wolfgang Denk wrote:
>> Dear Chris Ruehl,
>>
>> I wrote:
>>
>>> If everything else fails, use "USE_PRIVATE_LIBGCC=y" on the make
>>> command line.
>>
>> I mean: use "USE_PRIVATE_LIBGCC=yes" on the make command line.
>
> after I set this option the build failed for
>
> /uboot.d/u-boot-git/arch/arm/lib/libgcc.o -Map u-boot.map -o u-boot
> fs/jffs2/libjffs2.o: In function `jffs2_1pass_build_lists':
> /opt/cross_build/uboot.d/u-boot-git/fs/jffs2/jffs2_1pass.c:1441:
> undefined reference to `__aeabi_uldivmod'
>
> I mentioned this reference as "root of the evil" before :-)
>
> Chris
>
>>
>>
>> Best regards,
>>
>> Wolfgang Denk
>>
>
just to let you know, I open a thread on the linaro tool-chain mail list
for this problem.
Chris
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2013-10-23 1:44 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-10-22 2:15 [U-Boot] v2013.10 failed build with jffs2 cmd Chris Ruehl
[not found] ` <20131022060753.9F8EB380A62@gemini.denx.de>
2013-10-22 6:54 ` Chris Ruehl
-- strict thread matches above, loose matches on Subject: below --
2013-10-22 12:13 Wolfgang Denk
2013-10-23 0:36 ` Chris Ruehl
2013-10-23 1:44 ` Chris Ruehl
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox