From: Tom Rini <trini@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [RESEND PATCH v3 1/2] ARM: IGEP0033: rename config file to am335x_igep0033.h
Date: Fri, 25 Oct 2013 15:41:45 -0400 [thread overview]
Message-ID: <526AC979.5060906@ti.com> (raw)
In-Reply-To: <CABxcv==dBNpETkhoX7+nQ4Fu6=B+FCeWykBEvgC-M8H7-_yb5A@mail.gmail.com>
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On 10/24/2013 04:22 PM, Javier Martinez Canillas wrote:
> On Thu, Oct 17, 2013 at 6:30 AM, Javier Martinez Canillas
> <javier@dowhile0.org> wrote:
>> From: Javier Martinez Canillas <javier@dowhile0.org>
>>
>> There seems to be a naming convention for the configuration
>> files for boards using the same SoC family. This makes
>> easier to do changes that affect different boards based
>> on the same SoC.
>>
>> Since the IGEP COM AQUILA use TI AM335x processors, is better
>> to rename its board config to use this naming scheme.
>>
>> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
>> Acked-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
>> ---
>>
>> Changes since v2:
>> - Rebase patch to adapt to new boards.cfg file format.
>>
>> Changes since v1:
>> - Fix some issues in the commit changelog pointed out by Enric Balletbo.
>>
>> boards.cfg | 2 +-
>> include/configs/{igep0033.h => am335x_igep0033.h} | 0
>> 2 files changed, 1 insertion(+), 1 deletion(-)
>> rename include/configs/{igep0033.h => am335x_igep0033.h} (100%)
>>
>> diff --git a/boards.cfg b/boards.cfg
>> index aa2ee64..c8b7868 100644
>> --- a/boards.cfg
>> +++ b/boards.cfg
>> @@ -246,7 +246,7 @@ Active arm arm946es - armltd integrator
>> Active arm armv7 - armltd vexpress vexpress_ca15_tc2 - -
>> Active arm armv7 - armltd vexpress vexpress_ca5x2 - Matt Waddel <matt.waddel@linaro.org>
>> Active arm armv7 - armltd vexpress vexpress_ca9x4 - Matt Waddel <matt.waddel@linaro.org>
>> -Active arm armv7 am33xx isee igep0033 igep0033 - Enric Balletbo i Serra <eballetbo@iseebcn.com>
>> +Active arm armv7 am33xx isee igep0033 am335x_igep0033 - Enric Balletbo i Serra <eballetbo@iseebcn.com>
>> Active arm armv7 am33xx phytec pcm051 pcm051 pcm051 Lars Poeschel <poeschel@lemonage.de>
>> Active arm armv7 am33xx siemens dxr2 dxr2 - Roger Meier <r.meier@siemens.com>
>> Active arm armv7 am33xx siemens pxm2 pxm2 - Roger Meier <r.meier@siemens.com>
>> diff --git a/include/configs/igep0033.h b/include/configs/am335x_igep0033.h
>> similarity index 100%
>> rename from include/configs/igep0033.h
>> rename to include/configs/am335x_igep0033.h
>> --
>> 1.8.4.rc3
>>
>
> Hi Tom,
>
> Any comments on these patches?
Looks good, and I do need to put on my u-boot-ti hat on and collect up
patches.
- --
Tom
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/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=I7L2
-----END PGP SIGNATURE-----
prev parent reply other threads:[~2013-10-25 19:41 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-17 4:30 [U-Boot] [RESEND PATCH v3 1/2] ARM: IGEP0033: rename config file to am335x_igep0033.h Javier Martinez Canillas
2013-10-17 4:30 ` [U-Boot] [RESEND PATCH v3 2/2] OMAP3: igep00x0: rename config file to omap3_igep00x0.h Javier Martinez Canillas
2013-10-24 20:22 ` [U-Boot] [RESEND PATCH v3 1/2] ARM: IGEP0033: rename config file to am335x_igep0033.h Javier Martinez Canillas
2013-10-25 19:41 ` Tom Rini [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=526AC979.5060906@ti.com \
--to=trini@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox