* [U-Boot] [PATCH 1/2] esdhc: memset mmc struct before putting into use
@ 2013-10-25 1:54 Haijun Zhang
2013-10-25 1:54 ` [U-Boot] [PATCH 2/2] powerpc/esdhc: hack t4240 host capabilities register for VS33 bit Haijun Zhang
2013-10-25 16:28 ` [U-Boot] [PATCH 1/2] esdhc: memset mmc struct before putting into use Ryan Barnett
0 siblings, 2 replies; 8+ messages in thread
From: Haijun Zhang @ 2013-10-25 1:54 UTC (permalink / raw)
To: u-boot
struct mmc should be clear to all '0' after malloc to avoid
unexpect variable value.
Like mmc->has_init = xxx.
In this case mmcinfo will believe the card had been initialized before
and skip the initialization.
Test on P5040 and T4240,
Error Log:
=> mmcinfo
Device: FSL_SDHC
Manufacturer ID: 0
OEM: 0
Name: Tran Speed: 0
Rd Block Len: 0
MMC version 0.0
High Capacity: No
Capacity: 0 Bytes
Bus Width: 0-bit
=>
Signed-off-by: Haijun Zhang <Haijun.Zhang@freescale.com>
Signed-off-by: Xie Shaohui-B21989 <B21989@freescale.com>
---
drivers/mmc/fsl_esdhc.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index a7170b4..d4c1eef 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -521,6 +521,7 @@ int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg)
if (!mmc)
return -ENOMEM;
+ memset(mmc, 0, sizeof(struct mmc));
sprintf(mmc->name, "FSL_SDHC");
regs = (struct fsl_esdhc *)cfg->esdhc_base;
--
1.8.4
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [U-Boot] [PATCH 2/2] powerpc/esdhc: hack t4240 host capabilities register for VS33 bit
2013-10-25 1:54 [U-Boot] [PATCH 1/2] esdhc: memset mmc struct before putting into use Haijun Zhang
@ 2013-10-25 1:54 ` Haijun Zhang
2013-10-25 3:24 ` sun york-R58495
2013-10-29 18:34 ` Scott Wood
2013-10-25 16:28 ` [U-Boot] [PATCH 1/2] esdhc: memset mmc struct before putting into use Ryan Barnett
1 sibling, 2 replies; 8+ messages in thread
From: Haijun Zhang @ 2013-10-25 1:54 UTC (permalink / raw)
To: u-boot
T4240 eSDHC host capabilities reigster should have VS33 bit define.
hack the code to add the 3.3 voltage support
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Haijun Zhang <Haijun.Zhang@freescale.com>
---
arch/powerpc/include/asm/config_mpc85xx.h | 1 +
drivers/mmc/fsl_esdhc.c | 6 ++++++
2 files changed, 7 insertions(+)
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index 946ea97..84e79c8 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -596,6 +596,7 @@
#define CONFIG_SYS_FSL_SRIO_LIODN
#define CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE
#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
+#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
#define CONFIG_SYS_FSL_ERRATUM_A004468
#define CONFIG_SYS_FSL_ERRATUM_A_004934
#define CONFIG_SYS_FSL_ERRATUM_A005871
diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index d4c1eef..b8b2907 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -545,6 +545,12 @@ int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg)
caps = caps & ~(ESDHC_HOSTCAPBLT_SRS |
ESDHC_HOSTCAPBLT_VS18 | ESDHC_HOSTCAPBLT_VS30);
#endif
+
+/* T4240 host controller capabilities register should have VS33 bit */
+#ifdef CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
+ caps = caps | ESDHC_HOSTCAPBLT_VS33;
+#endif
+
if (caps & ESDHC_HOSTCAPBLT_VS18)
voltage_caps |= MMC_VDD_165_195;
if (caps & ESDHC_HOSTCAPBLT_VS30)
--
1.8.4
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [U-Boot] [PATCH 2/2] powerpc/esdhc: hack t4240 host capabilities register for VS33 bit
2013-10-25 1:54 ` [U-Boot] [PATCH 2/2] powerpc/esdhc: hack t4240 host capabilities register for VS33 bit Haijun Zhang
@ 2013-10-25 3:24 ` sun york-R58495
2013-10-29 18:34 ` Scott Wood
1 sibling, 0 replies; 8+ messages in thread
From: sun york-R58495 @ 2013-10-25 3:24 UTC (permalink / raw)
To: u-boot
On Oct 24, 2013, at 6:54 PM, Haijun Zhang wrote:
> T4240 eSDHC host capabilities reigster should have VS33 bit define.
> hack the code to add the 3.3 voltage support
Shall we call it quirk rather than hack? Native English speakers, please chime in.
York
^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] [PATCH 2/2] powerpc/esdhc: hack t4240 host capabilities register for VS33 bit
2013-10-25 1:54 ` [U-Boot] [PATCH 2/2] powerpc/esdhc: hack t4240 host capabilities register for VS33 bit Haijun Zhang
2013-10-25 3:24 ` sun york-R58495
@ 2013-10-29 18:34 ` Scott Wood
2013-10-30 3:52 ` Zhang Haijun
1 sibling, 1 reply; 8+ messages in thread
From: Scott Wood @ 2013-10-29 18:34 UTC (permalink / raw)
To: u-boot
On Fri, 2013-10-25 at 09:54 +0800, Haijun Zhang wrote:
> T4240 eSDHC host capabilities reigster should have VS33 bit define.
> hack the code to add the 3.3 voltage support
>
> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
> Signed-off-by: Haijun Zhang <Haijun.Zhang@freescale.com>
> ---
> arch/powerpc/include/asm/config_mpc85xx.h | 1 +
> drivers/mmc/fsl_esdhc.c | 6 ++++++
> 2 files changed, 7 insertions(+)
>
> diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
> index 946ea97..84e79c8 100644
> --- a/arch/powerpc/include/asm/config_mpc85xx.h
> +++ b/arch/powerpc/include/asm/config_mpc85xx.h
> @@ -596,6 +596,7 @@
> #define CONFIG_SYS_FSL_SRIO_LIODN
> #define CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE
> #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
> +#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
> #define CONFIG_SYS_FSL_ERRATUM_A004468
> #define CONFIG_SYS_FSL_ERRATUM_A_004934
> #define CONFIG_SYS_FSL_ERRATUM_A005871
> diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
> index d4c1eef..b8b2907 100644
> --- a/drivers/mmc/fsl_esdhc.c
> +++ b/drivers/mmc/fsl_esdhc.c
> @@ -545,6 +545,12 @@ int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg)
> caps = caps & ~(ESDHC_HOSTCAPBLT_SRS |
> ESDHC_HOSTCAPBLT_VS18 | ESDHC_HOSTCAPBLT_VS30);
> #endif
> +
> +/* T4240 host controller capabilities register should have VS33 bit */
> +#ifdef CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
> + caps = caps | ESDHC_HOSTCAPBLT_VS33;
> +#endif
Is there an erratum associated with this? Is this that
t4240qds-specific bug, or a different bug that affects all t4240?
-Scott
^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] [PATCH 2/2] powerpc/esdhc: hack t4240 host capabilities register for VS33 bit
2013-10-29 18:34 ` Scott Wood
@ 2013-10-30 3:52 ` Zhang Haijun
0 siblings, 0 replies; 8+ messages in thread
From: Zhang Haijun @ 2013-10-30 3:52 UTC (permalink / raw)
To: u-boot
? 2013/10/30 2:34, Scott Wood ??:
> On Fri, 2013-10-25 at 09:54 +0800, Haijun Zhang wrote:
>> T4240 eSDHC host capabilities reigster should have VS33 bit define.
>> hack the code to add the 3.3 voltage support
>>
>> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
>> Signed-off-by: Haijun Zhang <Haijun.Zhang@freescale.com>
>> ---
>> arch/powerpc/include/asm/config_mpc85xx.h | 1 +
>> drivers/mmc/fsl_esdhc.c | 6 ++++++
>> 2 files changed, 7 insertions(+)
>>
>> diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
>> index 946ea97..84e79c8 100644
>> --- a/arch/powerpc/include/asm/config_mpc85xx.h
>> +++ b/arch/powerpc/include/asm/config_mpc85xx.h
>> @@ -596,6 +596,7 @@
>> #define CONFIG_SYS_FSL_SRIO_LIODN
>> #define CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE
>> #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
>> +#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
>> #define CONFIG_SYS_FSL_ERRATUM_A004468
>> #define CONFIG_SYS_FSL_ERRATUM_A_004934
>> #define CONFIG_SYS_FSL_ERRATUM_A005871
>> diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
>> index d4c1eef..b8b2907 100644
>> --- a/drivers/mmc/fsl_esdhc.c
>> +++ b/drivers/mmc/fsl_esdhc.c
>> @@ -545,6 +545,12 @@ int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg)
>> caps = caps & ~(ESDHC_HOSTCAPBLT_SRS |
>> ESDHC_HOSTCAPBLT_VS18 | ESDHC_HOSTCAPBLT_VS30);
>> #endif
>> +
>> +/* T4240 host controller capabilities register should have VS33 bit */
>> +#ifdef CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
>> + caps = caps | ESDHC_HOSTCAPBLT_VS33;
>> +#endif
> Is there an erratum associated with this? Is this that
> t4240qds-specific bug, or a different bug that affects all t4240?
No such relevant errata. I think this capacity missing is also exist on
other T4240 board but not be confirmed.
So, I update this patch to make sure the change only affect T4240QDS.
> -Scott
>
>
--
Thanks & Regards
Haijun.
^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] [PATCH 1/2] esdhc: memset mmc struct before putting into use
2013-10-25 1:54 [U-Boot] [PATCH 1/2] esdhc: memset mmc struct before putting into use Haijun Zhang
2013-10-25 1:54 ` [U-Boot] [PATCH 2/2] powerpc/esdhc: hack t4240 host capabilities register for VS33 bit Haijun Zhang
@ 2013-10-25 16:28 ` Ryan Barnett
2013-10-28 2:00 ` Zhang Haijun
1 sibling, 1 reply; 8+ messages in thread
From: Ryan Barnett @ 2013-10-25 16:28 UTC (permalink / raw)
To: u-boot
Haijun Zhang <Haijun.Zhang@freescale.com> wrote on 10/24/2013 08:54:42 PM:
> struct mmc should be clear to all '0' after malloc to avoid
> unexpect variable value.
>
> Like mmc->has_init = xxx.
> In this case mmcinfo will believe the card had been initialized before
> and skip the initialization.
>
> Test on P5040 and T4240,
> Error Log:
>
> => mmcinfo
> Device: FSL_SDHC
> Manufacturer ID: 0
> OEM: 0
> Name: Tran Speed: 0
> Rd Block Len: 0
> MMC version 0.0
> High Capacity: No
> Capacity: 0 Bytes
> Bus Width: 0-bit
> =>
>
> Signed-off-by: Haijun Zhang <Haijun.Zhang@freescale.com>
> Signed-off-by: Xie Shaohui-B21989 <B21989@freescale.com>
Tested-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Verified that this patch fixes issues related to booting from eSDHC
interface on the P2041RDB with U-Boot 2013.10.
> ---
> drivers/mmc/fsl_esdhc.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
> index a7170b4..d4c1eef 100644
> --- a/drivers/mmc/fsl_esdhc.c
> +++ b/drivers/mmc/fsl_esdhc.c
> @@ -521,6 +521,7 @@ int fsl_esdhc_initialize(bd_t *bis, struct
fsl_esdhc_cfg *cfg)
> if (!mmc)
> return -ENOMEM;
>
> + memset(mmc, 0, sizeof(struct mmc));
> sprintf(mmc->name, "FSL_SDHC");
> regs = (struct fsl_esdhc *)cfg->esdhc_base;
>
> --
> 1.8.4
>
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] [PATCH 1/2] esdhc: memset mmc struct before putting into use
2013-10-25 16:28 ` [U-Boot] [PATCH 1/2] esdhc: memset mmc struct before putting into use Ryan Barnett
@ 2013-10-28 2:00 ` Zhang Haijun
0 siblings, 0 replies; 8+ messages in thread
From: Zhang Haijun @ 2013-10-28 2:00 UTC (permalink / raw)
To: u-boot
Thanks. Barnett
:-)
? 2013/10/26 0:28, Ryan Barnett ??:
> Haijun Zhang <Haijun.Zhang@freescale.com> wrote on 10/24/2013 08:54:42 PM:
>
>> struct mmc should be clear to all '0' after malloc to avoid
>> unexpect variable value.
>>
>> Like mmc->has_init = xxx.
>> In this case mmcinfo will believe the card had been initialized before
>> and skip the initialization.
>>
>> Test on P5040 and T4240,
>> Error Log:
>>
>> => mmcinfo
>> Device: FSL_SDHC
>> Manufacturer ID: 0
>> OEM: 0
>> Name: Tran Speed: 0
>> Rd Block Len: 0
>> MMC version 0.0
>> High Capacity: No
>> Capacity: 0 Bytes
>> Bus Width: 0-bit
>> =>
>>
>> Signed-off-by: Haijun Zhang <Haijun.Zhang@freescale.com>
>> Signed-off-by: Xie Shaohui-B21989 <B21989@freescale.com>
> Tested-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
>
> Verified that this patch fixes issues related to booting from eSDHC
> interface on the P2041RDB with U-Boot 2013.10.
>
>> ---
>> drivers/mmc/fsl_esdhc.c | 1 +
>> 1 file changed, 1 insertion(+)
>>
>> diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
>> index a7170b4..d4c1eef 100644
>> --- a/drivers/mmc/fsl_esdhc.c
>> +++ b/drivers/mmc/fsl_esdhc.c
>> @@ -521,6 +521,7 @@ int fsl_esdhc_initialize(bd_t *bis, struct
> fsl_esdhc_cfg *cfg)
>> if (!mmc)
>> return -ENOMEM;
>>
>> + memset(mmc, 0, sizeof(struct mmc));
>> sprintf(mmc->name, "FSL_SDHC");
>> regs = (struct fsl_esdhc *)cfg->esdhc_base;
>>
>> --
>> 1.8.4
>>
>>
>> _______________________________________________
>> U-Boot mailing list
>> U-Boot at lists.denx.de
>> http://lists.denx.de/mailman/listinfo/u-boot
>
--
Thanks & Regards
Haijun.
^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] [PATCH 1/2] esdhc: memset mmc struct before putting into use
@ 2013-10-25 4:36 Haijun Zhang
0 siblings, 0 replies; 8+ messages in thread
From: Haijun Zhang @ 2013-10-25 4:36 UTC (permalink / raw)
To: u-boot
struct mmc should be clear to all '0' after malloc to avoid
unexpect variable value.
Like mmc->has_init = xxx.
In this case mmcinfo will believe the card had been initialized before
and skip the initialization.
Test on P5040 and T4240,
Error Log:
=> mmcinfo
Device: FSL_SDHC
Manufacturer ID: 0
OEM: 0
Name: Tran Speed: 0
Rd Block Len: 0
MMC version 0.0
High Capacity: No
Capacity: 0 Bytes
Bus Width: 0-bit
=>
Signed-off-by: Haijun Zhang <Haijun.Zhang@freescale.com>
Signed-off-by: Xie Shaohui-B21989 <B21989@freescale.com>
---
drivers/mmc/fsl_esdhc.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index a7170b4..d4c1eef 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -521,6 +521,7 @@ int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg)
if (!mmc)
return -ENOMEM;
+ memset(mmc, 0, sizeof(struct mmc));
sprintf(mmc->name, "FSL_SDHC");
regs = (struct fsl_esdhc *)cfg->esdhc_base;
--
1.8.4
^ permalink raw reply related [flat|nested] 8+ messages in thread
end of thread, other threads:[~2013-10-30 3:52 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-10-25 1:54 [U-Boot] [PATCH 1/2] esdhc: memset mmc struct before putting into use Haijun Zhang
2013-10-25 1:54 ` [U-Boot] [PATCH 2/2] powerpc/esdhc: hack t4240 host capabilities register for VS33 bit Haijun Zhang
2013-10-25 3:24 ` sun york-R58495
2013-10-29 18:34 ` Scott Wood
2013-10-30 3:52 ` Zhang Haijun
2013-10-25 16:28 ` [U-Boot] [PATCH 1/2] esdhc: memset mmc struct before putting into use Ryan Barnett
2013-10-28 2:00 ` Zhang Haijun
-- strict thread matches above, loose matches on Subject: below --
2013-10-25 4:36 Haijun Zhang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox