From: Jaehoon Chung <jh80.chung@samsung.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 10/10 V6] DWMMC: SMDK5420: Disable SMU for eMMC
Date: Tue, 29 Oct 2013 19:24:17 +0900 [thread overview]
Message-ID: <526F8CD1.4080700@samsung.com> (raw)
In-Reply-To: <1383031393-6093-11-git-send-email-rajeshwari.s@samsung.com>
Looks good to me.
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
On 10/29/2013 04:23 PM, Rajeshwari S Shinde wrote:
> SMDK5420 has a new Security Management Unit added
> for dwmmc driver, hence, configuring the control
> registers to support booting via eMMC.
>
> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
> Acked-by: Simon Glass <sjg@chromium.org>
> ---
> Changes in V3:
> - New patch.
> Changes in V4:
> Added flag to dissble SMU
> Changes in V5:
> - None
> Changes in V6:
> - Moved the SMU definitions to arch/arm dwmmc.h
> arch/arm/include/asm/arch-exynos/dwmmc.h | 13 +++++++++++++
> drivers/mmc/dw_mmc.c | 11 +++++++++++
> drivers/mmc/exynos_dw_mmc.c | 3 +++
> include/dwmmc.h | 3 +++
> 4 files changed, 30 insertions(+)
>
> diff --git a/arch/arm/include/asm/arch-exynos/dwmmc.h b/arch/arm/include/asm/arch-exynos/dwmmc.h
> index b9eca76..d1c5d4f 100644
> --- a/arch/arm/include/asm/arch-exynos/dwmmc.h
> +++ b/arch/arm/include/asm/arch-exynos/dwmmc.h
> @@ -14,6 +14,19 @@
> #define DWMCI_SET_DRV_CLK(x) ((x) << 16)
> #define DWMCI_SET_DIV_RATIO(x) ((x) << 24)
>
> +#define EMMCP_MPSBEGIN0 0x1200
> +#define EMMCP_SEND0 0x1204
> +#define EMMCP_CTRL0 0x120C
> +
> +#define MPSCTRL_SECURE_READ_BIT (0x1<<7)
> +#define MPSCTRL_SECURE_WRITE_BIT (0x1<<6)
> +#define MPSCTRL_NON_SECURE_READ_BIT (0x1<<5)
> +#define MPSCTRL_NON_SECURE_WRITE_BIT (0x1<<4)
> +#define MPSCTRL_USE_FUSE_KEY (0x1<<3)
> +#define MPSCTRL_ECB_MODE (0x1<<2)
> +#define MPSCTRL_ENCRYPTION (0x1<<1)
> +#define MPSCTRL_VALID (0x1<<0)
> +
> #ifdef CONFIG_OF_CONTROL
> int exynos_dwmmc_init(const void *blob);
> #endif
> diff --git a/drivers/mmc/dw_mmc.c b/drivers/mmc/dw_mmc.c
> index 9a803a0..a3506d4 100644
> --- a/drivers/mmc/dw_mmc.c
> +++ b/drivers/mmc/dw_mmc.c
> @@ -11,6 +11,7 @@
> #include <mmc.h>
> #include <dwmmc.h>
> #include <asm-generic/errno.h>
> +#include <asm/arch/dwmmc.h>
>
> #define PAGE_SIZE 4096
>
> @@ -301,6 +302,16 @@ static int dwmci_init(struct mmc *mmc)
> struct dwmci_host *host = (struct dwmci_host *)mmc->priv;
> u32 fifo_size;
>
> + if (host->quirks & DWMCI_QUIRK_DISABLE_SMU) {
> + dwmci_writel(host, EMMCP_MPSBEGIN0, 0);
> + dwmci_writel(host, EMMCP_SEND0, 0);
> + dwmci_writel(host, EMMCP_CTRL0,
> + MPSCTRL_SECURE_READ_BIT |
> + MPSCTRL_SECURE_WRITE_BIT |
> + MPSCTRL_NON_SECURE_READ_BIT |
> + MPSCTRL_NON_SECURE_WRITE_BIT | MPSCTRL_VALID);
> + }
> +
> dwmci_writel(host, DWMCI_PWREN, 1);
>
> if (!dwmci_wait_reset(host, DWMCI_RESET_ALL)) {
> diff --git a/drivers/mmc/exynos_dw_mmc.c b/drivers/mmc/exynos_dw_mmc.c
> index 4ef9fec..f7439a0 100644
> --- a/drivers/mmc/exynos_dw_mmc.c
> +++ b/drivers/mmc/exynos_dw_mmc.c
> @@ -62,6 +62,9 @@ int exynos_dwmci_add_port(int index, u32 regbase, int bus_width, u32 clksel)
> host->name = "EXYNOS DWMMC";
> host->ioaddr = (void *)regbase;
> host->buswidth = bus_width;
> +#ifdef CONFIG_EXYNOS5420
> + host->quirks = DWMCI_QUIRK_DISABLE_SMU;
> +#endif
>
> if (clksel) {
> host->clksel_val = clksel;
> diff --git a/include/dwmmc.h b/include/dwmmc.h
> index 08ced0b..6263140 100644
> --- a/include/dwmmc.h
> +++ b/include/dwmmc.h
> @@ -123,6 +123,9 @@
> #define DWMCI_BMOD_IDMAC_FB (1 << 1)
> #define DWMCI_BMOD_IDMAC_EN (1 << 7)
>
> +/* quirks */
> +#define DWMCI_QUIRK_DISABLE_SMU (1 << 0)
> +
> struct dwmci_host {
> char *name;
> void *ioaddr;
>
next prev parent reply other threads:[~2013-10-29 10:24 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-29 7:23 [U-Boot] [PATCH 00/10 V6] EXYNOS5420: Add SMDK5420 board support Rajeshwari S Shinde
2013-10-29 7:23 ` [U-Boot] [PATCH 01/10 V6] EXYNOS5: Create a common board file Rajeshwari S Shinde
2013-11-08 8:13 ` Przemyslaw Marczak
2013-11-08 8:37 ` Rajeshwari Birje
2013-11-08 9:03 ` Przemyslaw Marczak
2013-11-08 9:27 ` Rajeshwari Birje
2013-11-08 9:46 ` Przemyslaw Marczak
2013-11-08 9:52 ` Rajeshwari Birje
2013-10-29 7:23 ` [U-Boot] [PATCH 02/10 V6] Exynos5420: Add base addresses for 5420 Rajeshwari S Shinde
2013-11-13 3:20 ` Minkyu Kang
2013-10-29 7:23 ` [U-Boot] [PATCH 03/10 V6] Exynos5420: Add clock initialization " Rajeshwari S Shinde
2013-11-13 2:45 ` Minkyu Kang
2013-11-13 11:17 ` Rajeshwari Birje
2013-11-14 1:56 ` Minkyu Kang
2013-10-29 7:23 ` [U-Boot] [PATCH 04/10 V6] Exynos5420: Add DDR3 " Rajeshwari S Shinde
2013-11-13 3:24 ` Minkyu Kang
2013-10-29 7:23 ` [U-Boot] [PATCH 05/10 V6] Exynos5420: Add support for 5420 in pinmux and gpio Rajeshwari S Shinde
2013-11-13 3:01 ` Minkyu Kang
2013-11-13 6:04 ` Rajeshwari Birje
2013-11-13 6:08 ` Rajeshwari Birje
2013-11-14 2:46 ` Minkyu Kang
2013-10-29 7:23 ` [U-Boot] [PATCH 06/10 V6] Exynos5420: Add base patch for SMDK5420 Rajeshwari S Shinde
2013-11-13 3:09 ` Minkyu Kang
2013-10-29 7:23 ` [U-Boot] [PATCH 07/10 V6] DTS: Add dts support " Rajeshwari S Shinde
2013-11-13 3:17 ` Minkyu Kang
2013-11-13 4:26 ` Rajeshwari Birje
2013-11-14 2:01 ` Minkyu Kang
2013-11-15 2:32 ` Rajeshwari Birje
2013-10-29 7:23 ` [U-Boot] [PATCH 08/10 V6] Config: Add initial config " Rajeshwari S Shinde
2013-11-13 3:31 ` Minkyu Kang
2013-10-29 7:23 ` [U-Boot] [PATCH 09/10 V6] SPL: EXYNOS: Prepare for variable size SPL support Rajeshwari S Shinde
2013-10-29 7:23 ` [U-Boot] [PATCH 10/10 V6] DWMMC: SMDK5420: Disable SMU for eMMC Rajeshwari S Shinde
2013-10-29 10:24 ` Jaehoon Chung [this message]
2013-10-31 7:50 ` Pantelis Antoniou
2013-10-31 8:42 ` [U-Boot] [PATCH 00/10 V6] EXYNOS5420: Add SMDK5420 board support Rajeshwari Birje
2013-11-06 11:42 ` Rajeshwari Birje
2013-11-07 1:32 ` Minkyu Kang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=526F8CD1.4080700@samsung.com \
--to=jh80.chung@samsung.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox