* [U-Boot] [PATCH] mx5: lowlevel_init: Remove unused macro
@ 2013-09-30 21:28 Fabio Estevam
2013-10-01 8:30 ` Stefano Babic
2013-10-31 17:01 ` Stefano Babic
0 siblings, 2 replies; 3+ messages in thread
From: Fabio Estevam @ 2013-09-30 21:28 UTC (permalink / raw)
To: u-boot
From: Fabio Estevam <fabio.estevam@freescale.com>
setup_wdog macro is not used anywhere, so just remove it.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
arch/arm/cpu/armv7/mx5/lowlevel_init.S | 6 ------
1 file changed, 6 deletions(-)
diff --git a/arch/arm/cpu/armv7/mx5/lowlevel_init.S b/arch/arm/cpu/armv7/mx5/lowlevel_init.S
index e4cd85c..bffac67 100644
--- a/arch/arm/cpu/armv7/mx5/lowlevel_init.S
+++ b/arch/arm/cpu/armv7/mx5/lowlevel_init.S
@@ -375,12 +375,6 @@ setup_pll_func:
#endif /* CONFIG_MX53 */
.endm
-.macro setup_wdog
- ldr r0, =WDOG1_BASE_ADDR
- mov r1, #0x30
- strh r1, [r0]
-.endm
-
ENTRY(lowlevel_init)
mov r10, lr
mov r4, #0 /* Fix R4 to 0 */
--
1.8.1.2
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [U-Boot] [PATCH] mx5: lowlevel_init: Remove unused macro
2013-09-30 21:28 [U-Boot] [PATCH] mx5: lowlevel_init: Remove unused macro Fabio Estevam
@ 2013-10-01 8:30 ` Stefano Babic
2013-10-31 17:01 ` Stefano Babic
1 sibling, 0 replies; 3+ messages in thread
From: Stefano Babic @ 2013-10-01 8:30 UTC (permalink / raw)
To: u-boot
On 30/09/2013 23:28, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@freescale.com>
>
> setup_wdog macro is not used anywhere, so just remove it.
>
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---
> arch/arm/cpu/armv7/mx5/lowlevel_init.S | 6 ------
> 1 file changed, 6 deletions(-)
>
> diff --git a/arch/arm/cpu/armv7/mx5/lowlevel_init.S b/arch/arm/cpu/armv7/mx5/lowlevel_init.S
> index e4cd85c..bffac67 100644
> --- a/arch/arm/cpu/armv7/mx5/lowlevel_init.S
> +++ b/arch/arm/cpu/armv7/mx5/lowlevel_init.S
> @@ -375,12 +375,6 @@ setup_pll_func:
> #endif /* CONFIG_MX53 */
> .endm
>
> -.macro setup_wdog
> - ldr r0, =WDOG1_BASE_ADDR
> - mov r1, #0x30
> - strh r1, [r0]
> -.endm
> -
> ENTRY(lowlevel_init)
> mov r10, lr
> mov r4, #0 /* Fix R4 to 0 */
>
Acked-by: Stefano Babic <sbabic@denx.de>
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 3+ messages in thread
* [U-Boot] [PATCH] mx5: lowlevel_init: Remove unused macro
2013-09-30 21:28 [U-Boot] [PATCH] mx5: lowlevel_init: Remove unused macro Fabio Estevam
2013-10-01 8:30 ` Stefano Babic
@ 2013-10-31 17:01 ` Stefano Babic
1 sibling, 0 replies; 3+ messages in thread
From: Stefano Babic @ 2013-10-31 17:01 UTC (permalink / raw)
To: u-boot
On 30/09/2013 23:28, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@freescale.com>
>
> setup_wdog macro is not used anywhere, so just remove it.
>
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2013-10-31 17:01 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-09-30 21:28 [U-Boot] [PATCH] mx5: lowlevel_init: Remove unused macro Fabio Estevam
2013-10-01 8:30 ` Stefano Babic
2013-10-31 17:01 ` Stefano Babic
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox