From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Thu, 31 Oct 2013 18:01:53 +0100 Subject: [U-Boot] [PATCH 1/4] mx6: Remove PAD_CTL_DSE_120ohm from i.MX6DL's IPU1_DI0_PIN4 pin In-Reply-To: <1382398500-9649-2-git-send-email-otavio@ossystems.com.br> References: <1382398500-9649-1-git-send-email-otavio@ossystems.com.br> <1382398500-9649-2-git-send-email-otavio@ossystems.com.br> Message-ID: <52728D01.6040305@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 22/10/2013 01:34, Otavio Salvador wrote: > This removes the PAD_CTL_DSE_120ohm as done for i.MX6Q's IPU1_DI0_PIN4 > pin definition and makes it aligned with 3.0.35-4.1.0 and 3.12 > mainline kernel. > > Signed-off-by: Otavio Salvador > --- Applied to u-boot-imx, thanks ! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================