From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Thu, 31 Oct 2013 18:02:19 +0100 Subject: [U-Boot] [PATCH 1/2] ARM: mxs: Enable DCDC converter for battery boot In-Reply-To: <1382959771-8983-1-git-send-email-marex@denx.de> References: <1382959771-8983-1-git-send-email-marex@denx.de> Message-ID: <52728D1B.90304@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 28/10/2013 12:29, Marek Vasut wrote: > In case the board detected sufficient voltage for battery boot, > make sure the DCDC converter is ON and the board is not running > only from linregs, otherwise an instability will be observed. > > Signed-off-by: Marek Vasut > Cc: Stefano Babic > Cc: Fabio Estevam > --- Applied to u-boot-imx, thanks ! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================