[U-Boot] [PATCH] fsl_esdhc: Add Auto command 12 interrupt bit detecting

[Zhang Haijun <b42677@freescale.com>]

Hi,  Antonious

How about this patch?
Could you give some advice?

? 2013/10/21 17:23, Zhang Haijun ??:
> Hi, Babic
>
> Thanks.
>
> This patch is test on PPC.
>
>
> Regards,
> Haijun
>
>
> ? 2013/10/21 17:19, Stefano Babic ??:
>> Hi,
>>
>> On 21/10/2013 10:23, Zhang Haijun wrote:
>>> Hi, all
>>>
>>> Who can give some comments?
>> I put Antonius in CC, he's the MMC custodian.
>>
>>
>> The driver is for both PPC and i.MX. On which platform do you test these
>> changes ?
>>
>> Best regards,
>> Stefano Babic
>>
>>>
>>> ? 2013/10/12 17:50, Haijun Zhang ??:
>>>> When Auto-CMD12 is used, the corresponding interrupt and error bit
>>>> should be enabled and set to reflect auto cmd 12 error.
>>>> Also add other command error detecting, like command index error,
>>>> CRC error etc. Without this command error bit set system will hang
>>>> due to the while loop.
>>>>
>>>> Signed-off-by: Haijun Zhang <Haijun.Zhang@freescale.com>
>>>> ---
>>>>   drivers/mmc/fsl_esdhc.c | 10 +++++-----
>>>>   include/fsl_esdhc.h     |  3 ++-
>>>>   2 files changed, 7 insertions(+), 6 deletions(-)
>>>>
>>>> diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
>>>> index dc1d002..5aa592b 100644
>>>> --- a/drivers/mmc/fsl_esdhc.c
>>>> +++ b/drivers/mmc/fsl_esdhc.c
>>>> @@ -342,13 +342,13 @@ esdhc_send_cmd(struct mmc *mmc, struct 
>>>> mmc_cmd *cmd, struct mmc_data *data)
>>>>   #endif
>>>>         /* Wait for the command to complete */
>>>> -    while (!(esdhc_read32(&regs->irqstat) & (IRQSTAT_CC | 
>>>> IRQSTAT_CTOE)))
>>>> +    while (!(esdhc_read32(&regs->irqstat) & (IRQSTAT_CC | CMD_ERR)))
>>>>           ;
>>>>         irqstat = esdhc_read32(&regs->irqstat);
>>>>         /* Reset CMD and DATA portions on error */
>>>> -    if (irqstat & (CMD_ERR | IRQSTAT_CTOE)) {
>>>> +    if (irqstat & CMD_ERR) {
>>>>           esdhc_write32(&regs->sysctl, esdhc_read32(&regs->sysctl) |
>>>>                     SYSCTL_RSTC);
>>>>           while (esdhc_read32(&regs->sysctl) & SYSCTL_RSTC)
>>>> @@ -363,12 +363,12 @@ esdhc_send_cmd(struct mmc *mmc, struct 
>>>> mmc_cmd *cmd, struct mmc_data *data)
>>>>           }
>>>>       }
>>>>   -    if (irqstat & CMD_ERR)
>>>> -        return COMM_ERR;
>>>> -
>>>>       if (irqstat & IRQSTAT_CTOE)
>>>>           return TIMEOUT;
>>>>   +    if (irqstat & CMD_ERR)
>>>> +        return COMM_ERR;
>>>> +
>>>>       /* Workaround for ESDHC errata ENGcm03648 */
>>>>       if (!data && (cmd->resp_type & MMC_RSP_BUSY)) {
>>>>           int timeout = 2500;
>>>> diff --git a/include/fsl_esdhc.h b/include/fsl_esdhc.h
>>>> index 67d6057..37dbe27 100644
>>>> --- a/include/fsl_esdhc.h
>>>> +++ b/include/fsl_esdhc.h
>>>> @@ -62,7 +62,8 @@
>>>>   #define IRQSTAT_TC        (0x00000002)
>>>>   #define IRQSTAT_CC        (0x00000001)
>>>>   -#define CMD_ERR        (IRQSTAT_CIE | IRQSTAT_CEBE | IRQSTAT_CCE)
>>>> +#define CMD_ERR        (IRQSTAT_CIE | IRQSTAT_CEBE | IRQSTAT_CCE | \
>>>> +                IRQSTAT_CTOE | IRQSTAT_AC12E)
>>>>   #define DATA_ERR    (IRQSTAT_DEBE | IRQSTAT_DCE | IRQSTAT_DTOE | \
>>>>                   IRQSTAT_DMAE)
>>>>   #define DATA_COMPLETE    (IRQSTAT_TC | IRQSTAT_DINT)
>>
>

-- 
Thanks & Regards
Haijun.