From mboxrd@z Thu Jan 1 00:00:00 1970 From: Heiko Schocher Date: Mon, 04 Nov 2013 07:56:35 +0100 Subject: [U-Boot] [PATCH v4] i2c, omap24xx: convert driver to new mutlibus/mutliadapter framework In-Reply-To: <526F9C44.30909@denx.de> References: <1382432598-22547-1-git-send-email-hs@denx.de> <526CC106.2030201@compulab.co.il> <526E01D5.5010103@denx.de> <526F96FE.4040006@compulab.co.il> <526F9C44.30909@denx.de> Message-ID: <52774523.1080909@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello Tom, Am 29.10.2013 12:30, schrieb Heiko Schocher: > Hello Igor, > > Am 29.10.2013 12:07, schrieb Igor Grinberg: >> On 10/28/13 08:19, Heiko Schocher wrote: >>> Hello Igor, >>> >>> Am 27.10.2013 08:30, schrieb Igor Grinberg: >>>> Hi Heiko, >>>> >>>> On 10/22/13 11:03, Heiko Schocher wrote: >>>>> - add omap24xx driver to new multibus/multiadpater support >>>>> - adapted all config files, which uses this driver >>>>> >>>>> Tested on the am335x based siemens boards rut, dxr2 and pxm2 >>>>> posted here: >>>>> http://patchwork.ozlabs.org/patch/263211/ >>>>> >>>>> Signed-off-by: Heiko Schocher >>>>> Tested-by: Tom Rini >>>>> Cc: Lars Poeschel >>>>> Cc: Steve Sakoman >>>>> Cc: Thomas Weber >>>>> Cc: Tom Rix >>>>> Cc: Grazvydas Ignotas >>>>> Cc: Enric Balletbo i Serra >>>>> Cc: Luca Ceresoli >>>>> Cc: Igor Grinberg >>>>> Cc: Ilya Yanok >>>>> Cc: Stefano Babic >>>>> Cc: Nishanth Menon >>>>> Cc: Pali Roh?r >>>>> Cc: Peter Barada >>>>> Cc: Nagendra T S >>>>> Cc: Michael Jones >>>>> Cc: Raphael Assenat >>>> >>>> [...] >>> [...] >>> >>>>> diff --git a/board/compulab/cm_t35/eeprom.h b/board/compulab/cm_t35/eeprom.h >>>>> index 02ffbb1..a07559d 100644 >>>>> --- a/board/compulab/cm_t35/eeprom.h >>>>> +++ b/board/compulab/cm_t35/eeprom.h >>>>> @@ -10,7 +10,7 @@ >>>>> #ifndef _EEPROM_ >>>>> #define _EEPROM_ >>>>> >>>>> -#ifdef CONFIG_DRIVER_OMAP34XX_I2C >>>>> +#ifdef CONFIG_SYS_I2C_OMAP34XX >>>>> int cm_t3x_eeprom_read_mac_addr(uchar *buf); >>>>> u32 cm_t3x_eeprom_get_board_rev(void); >>>>> #else >>>> >>>> Please, rebase on top of: >>>> http://patchwork.ozlabs.org/patch/275284/ >>>> which should be applied any time soon. >>>> >>>> Otherwise, >>>> Acked-by: Igor Grinberg >>> >>> Hmm.. I cannot see, that your patch is accepted ... but I looked in it, >>> and it looks good to me. So, I propose to add this patch to the i2c tree, >>> so I do the necessary changes in my patch when applying it to the >>> i2c tree (as they are trivial changes) ... >> >> Well, I have no problem with that, but we need to take into account >> that there are several more patches (unrelated to i2c) on the mailing >> list waiting for approval/apply and depend on my series. > > Ok. > >>> @Tom: Is this OK for you? >> >> I think, it would be better to apply my series to u-boot-ti and you can >> pull from it to the i2c tree? > > Hmm.. u-boot-i2c is based on u-boot.git not on u-boot-ti, and I did > not want to change this. I can of course rebase my patch against u-boot-ti > when Tom added your patch to u-boot-ti and resend it, and tom pick up my > patch ... Tom, what do you think? bye, Heiko -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany