public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Tom Rini <trini@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v4] i2c, omap24xx: convert driver to new mutlibus/mutliadapter framework
Date: Mon, 4 Nov 2013 08:39:29 -0500	[thread overview]
Message-ID: <5277A391.4090904@ti.com> (raw)
In-Reply-To: <52774523.1080909@denx.de>

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On 11/04/2013 01:56 AM, Heiko Schocher wrote:
> Hello Tom,
> 
> Am 29.10.2013 12:30, schrieb Heiko Schocher:
>> Hello Igor,
>> 
>> Am 29.10.2013 12:07, schrieb Igor Grinberg:
>>> On 10/28/13 08:19, Heiko Schocher wrote:
>>>> Hello Igor,
>>>> 
>>>> Am 27.10.2013 08:30, schrieb Igor Grinberg:
>>>>> Hi Heiko,
>>>>> 
>>>>> On 10/22/13 11:03, Heiko Schocher wrote:
>>>>>> - add omap24xx driver to new multibus/multiadpater
>>>>>> support - adapted all config files, which uses this
>>>>>> driver
>>>>>> 
>>>>>> Tested on the am335x based siemens boards rut, dxr2 and
>>>>>> pxm2 posted here: 
>>>>>> http://patchwork.ozlabs.org/patch/263211/
>>>>>> 
>>>>>> Signed-off-by: Heiko Schocher<hs@denx.de> Tested-by: Tom
>>>>>> Rini<trini@ti.com> Cc: Lars
>>>>>> Poeschel<poeschel@lemonage.de> Cc: Steve
>>>>>> Sakoman<sakoman@gmail.com> Cc: Thomas
>>>>>> Weber<weber@corscience.de> Cc: Tom
>>>>>> Rix<Tom.Rix@windriver.com> Cc: Grazvydas
>>>>>> Ignotas<notasas@gmail.com> Cc: Enric Balletbo i
>>>>>> Serra<eballetbo@iseebcn.com> Cc: Luca
>>>>>> Ceresoli<luca.ceresoli@comelit.it> Cc: Igor
>>>>>> Grinberg<grinberg@compulab.co.il> Cc: Ilya
>>>>>> Yanok<yanok@emcraft.com> Cc: Stefano
>>>>>> Babic<sbabic@denx.de> Cc: Nishanth Menon<nm@ti.com> Cc:
>>>>>> Pali Roh?r<pali.rohar@gmail.com> Cc: Peter
>>>>>> Barada<peter.barada@logicpd.com> Cc: Nagendra T
>>>>>> S<nagendra@mistralsolutions.com> Cc: Michael
>>>>>> Jones<michael.jones@matrix-vision.de> Cc: Raphael
>>>>>> Assenat<raph@8d.com>
>>>>> 
>>>>> [...]
>>>> [...]
>>>> 
>>>>>> diff --git a/board/compulab/cm_t35/eeprom.h 
>>>>>> b/board/compulab/cm_t35/eeprom.h index 02ffbb1..a07559d
>>>>>> 100644 --- a/board/compulab/cm_t35/eeprom.h +++
>>>>>> b/board/compulab/cm_t35/eeprom.h @@ -10,7 +10,7 @@ 
>>>>>> #ifndef _EEPROM_ #define _EEPROM_
>>>>>> 
>>>>>> -#ifdef CONFIG_DRIVER_OMAP34XX_I2C +#ifdef
>>>>>> CONFIG_SYS_I2C_OMAP34XX int
>>>>>> cm_t3x_eeprom_read_mac_addr(uchar *buf); u32
>>>>>> cm_t3x_eeprom_get_board_rev(void); #else
>>>>> 
>>>>> Please, rebase on top of: 
>>>>> http://patchwork.ozlabs.org/patch/275284/ which should be
>>>>> applied any time soon.
>>>>> 
>>>>> Otherwise, Acked-by: Igor
>>>>> Grinberg<grinberg@compulab.co.il>
>>>> 
>>>> Hmm.. I cannot see, that your patch is accepted ... but I
>>>> looked in it, and it looks good to me. So, I propose to add
>>>> this patch to the i2c tree, so I do the necessary changes in
>>>> my patch when applying it to the i2c tree (as they are
>>>> trivial changes) ...
>>> 
>>> Well, I have no problem with that, but we need to take into
>>> account that there are several more patches (unrelated to i2c)
>>> on the mailing list waiting for approval/apply and depend on my
>>> series.
>> 
>> Ok.
>> 
>>>> @Tom: Is this OK for you?
>>> 
>>> I think, it would be better to apply my series to u-boot-ti and
>>> you can pull from it to the i2c tree?
>> 
>> Hmm.. u-boot-i2c is based on u-boot.git not on u-boot-ti, and I
>> did not want to change this. I can of course rebase my patch
>> against u-boot-ti when Tom added your patch to u-boot-ti and
>> resend it, and tom pick up my patch ...
> 
> Tom, what do you think?

You should keep your tree based on u-boot/master.  I actually grabbed
Igor's patches Friday for u-boot-ti but didn't get a chance to send
out replies to everything I picked up before packing it up for the
weekend.

- -- 
Tom
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/
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=96H9
-----END PGP SIGNATURE-----

  reply	other threads:[~2013-11-04 13:39 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-10-22  9:03 [U-Boot] [PATCH v4] i2c, omap24xx: convert driver to new mutlibus/mutliadapter framework Heiko Schocher
2013-10-27  7:30 ` Igor Grinberg
2013-10-28  6:19   ` Heiko Schocher
2013-10-29 11:07     ` Igor Grinberg
2013-10-29 11:30       ` Heiko Schocher
2013-11-04  6:56         ` Heiko Schocher
2013-11-04 13:39           ` Tom Rini [this message]
2013-10-28  9:07 ` Stefano Babic
2013-11-13  6:33 ` [U-Boot] [U-Boot, " Heiko Schocher

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5277A391.4090904@ti.com \
    --to=trini@ti.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox