[U-Boot] [PATCH 0/5] i.MX6 (DQ/DLS): consolidate mux and pad names

[Eric Nelson <eric.nelson@boundarydevices.com>]

On 11/04/2013 03:56 PM, Eric Nelson wrote:
> This patch set consolidates mux and pad declarations for the i.MX6
> Dual/Quad and Dual-Lite/Solo processor variants.
>
> Patch 1 replaces the mux/pad names with their equivalents from
> 	the Linux kernel (from linux-next). This
> Patch 2 removes a set of completely useless pad declarations
> Patch 3 adds a number of registers that are defined in the Linux
> 	kernel and in the DLS variant, but not in the DQ.
> Patch 4 removes pad declarations that aren't used and aren't
> 	defined in the Linux kernel tree
> Patch 5 cleans up the whitespace in mx6[q|dl]_pins.h so the
> 	IOMUX_PAD() columns line up.
>
> Note to reviewers: Because the majority of the changes in this
> patch set are simple name changes, using the '--word-diff' git
> parameter makes review much easier:
>
> 	~/u-boot$ git diff HEAD^^^ --word-diff
>

I forgot to add that this patch set is based on imx-master with
three additional dependencies. The first was just submitted
today. The other two were merged to U-Boot master via u-boot-usb.

--- mx6: titanium: Move BSP code to barco board directory
	http://patchwork.ozlabs.org/patch/288124/

--- mx6: iomux: add GPR1 defines for use with nitrogen6x
	7132869d in u-boot master
	http://git.denx.de/?p=u-boot/u-boot-dfu.git;a=commitdiff;h=7132869d4c9e03180226146b27c8c4266ceab351

--- mx6: nitrogen6x: add otg usb host/device mode support
	08ce074e in u-boot master
	http://git.denx.de/?p=u-boot/u-boot-dfu.git;a=commitdiff;h=08ce074e56a1499e7b3c6a1134904b90d1c6c2e9

Regards,


Eric