[U-Boot] Pull request: u-boot-imx

Albert ARIBAUD
2013-11-07T09:49:00Z

Hi Stefano,

On Tue, 05 Nov 2013 15:23:19 +0100, Stefano Babic <sbabic@denx.de>
wrote:

> Hi Albert,
>
> please pull from u-boot-imx, thanks !
>
> The following changes since commit 262f08d6ea18a62f827b8ccb60f355ca2eaf6e2b:
>
> zynq: Use arch_cpu_init() instead of lowlevel_init() (2013-10-17
> 08:34:45 +0200)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-imx.git master
>
> for you to fetch changes up to c93addb5635630847e8a33f6dba4afef78a6d180:
>
> wandboard: README: Include the quad version (2013-11-04 09:56:25 +0100)
>
> ----------------------------------------------------------------
> Anatolij Gustschin (1):
> imx_watchdog: do not soft-reset while watchdog init
>
> Christoph G. Baumann (1):
> ARM: mxs: Configure 2 Gbit DDR2 RAM for BG0900
>
> Eric Nelson (1):
> i.MX6: nitrogen6x: fix erase size in 6x_upgrade.txt
>
> Fabio Estevam (5):
> udoo: Add initial support for mx6q udoo board
> ARM: mx5: Enable L2 cache
> mx5: lowlevel_init: Remove unused macro
> configs: imx: Make CONFIG_SYS_PROMPT uniform across FSL boards
> wandboard: README: Include the quad version
>
> Marek Vasut (4):
> ARM: mxs: tools: Use mkimage for BootStream generation
> ARM: mxs: Add PPC-AG BG0900 board
> ARM: mxs: Setup stack in JTAG mode
> ARM: mxs: Enable DCDC converter for battery boot
>
> Otavio Salvador (1):
> mx6: Remove PAD_CTL_DSE_120ohm from i.MX6DL's IPU1_DI0_PIN4 pin
>
> Pierre Aubert (1):
> mx6: compute PLL PFD frequencies rather than using defines
>
> Stefano Babic (1):
> Revert "configs: imx: Make CONFIG_SYS_PROMPT uniform across FSL
> boards"
>
> arch/arm/cpu/arm926ejs/mxs/Makefile | 11 +-
> arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg | 4 +-
> arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg | 4 +-
> arch/arm/cpu/arm926ejs/mxs/spl_power_init.c | 2 +
> arch/arm/cpu/arm926ejs/mxs/start.S | 9 ++
> arch/arm/cpu/armv7/mx5/lowlevel_init.S | 12 +-
> arch/arm/cpu/armv7/mx6/clock.c | 56 +++++--
> arch/arm/include/asm/arch-mx6/crm_regs.h | 11 --
> arch/arm/include/asm/arch-mx6/mx6dl_pins.h | 2 +-
> arch/arm/include/asm/arch-mxs/sys_proto.h | 2 +
> board/boundary/nitrogen6x/6x_upgrade.txt | 2 +-
> board/ppcag/bg0900/Makefile | 31 ++++
> board/ppcag/bg0900/bg0900.c | 86 +++++++++++
> board/ppcag/bg0900/spl_boot.c | 153 +++++++++++++++++++
> board/udoo/Makefile | 26 ++++
> board/udoo/udoo.c | 110 ++++++++++++++
> board/wandboard/README | 4 +-
> boards.cfg | 2 +
> doc/README.mxs | 39 ++++-
> drivers/watchdog/imx_watchdog.c | 3 +-
> include/configs/bg0900.h | 97 ++++++++++++
> include/configs/udoo.h | 206
> ++++++++++++++++++++++++++
> 22 files changed, 819 insertions(+), 53 deletions(-)
> create mode 100644 board/ppcag/bg0900/Makefile
> create mode 100644 board/ppcag/bg0900/bg0900.c
> create mode 100644 board/ppcag/bg0900/spl_boot.c
> create mode 100644 board/udoo/Makefile
> create mode 100644 board/udoo/udoo.c
> create mode 100644 include/configs/bg0900.h
> create mode 100644 include/configs/udoo.h
>

Applied to u-boot-arm/master, thanks!

Amicalement,
--
Albert.