[U-Boot] [PATCH 07/34] zynq: Add UART0, UART1 configs support

[Michal Simek <monstr@monstr.eu>]

On 11/06/2013 05:17 AM, Dinh Nguyen wrote:
> 
> On 11/5/13 11:46 AM, Jagannadha Sutradharudu Teki wrote:
>> Zynq uart controller support two serial ports like
>> CONFIG_ZYNQ_SERIAL_UART0 and CONFIG_ZYNQ_SERIAL_UART1
>> enabled both so-that the respective board will define
>> these macros based on their usage.
>>
>> Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
>> ---
>>  include/configs/zynq.h | 20 ++++++++++++++++----
>>  1 file changed, 16 insertions(+), 4 deletions(-)
>>
>> diff --git a/include/configs/zynq.h b/include/configs/zynq.h
>> index f32008b..1bcb28d 100644
>> --- a/include/configs/zynq.h
>> +++ b/include/configs/zynq.h
>> @@ -33,10 +33,22 @@
>>  	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
>>  
>>  /* Zynq Serial driver */
>> -#define CONFIG_ZYNQ_SERIAL
>> -#define CONFIG_ZYNQ_SERIAL_BASEADDR0	0xE0001000
>> -#define CONFIG_ZYNQ_SERIAL_BAUDRATE0	CONFIG_BAUDRATE
>> -#define CONFIG_ZYNQ_SERIAL_CLOCK0	50000000
>> +#define CONFIG_ZYNQ_SERIAL_UART1
>> +#ifdef CONFIG_ZYNQ_SERIAL_UART0
>> +# define CONFIG_ZYNQ_SERIAL_BASEADDR0	0xE0000000
>> +# define CONFIG_ZYNQ_SERIAL_BAUDRATE0	CONFIG_BAUDRATE
> Why couldn't you just use CONFIG_BAUDRATE? Why do you need to add
> another define?

If we start to use the same CONFIG_BAUDRATE(or better gd->baudrate)
in the driver then we lose config options to setup different baudrate
for every single device.

I haven't seen any code for SERIAL_MULTI if you want to configure
2 serial drivers but on different baudrate.
If there is better way how to do it please let us know.

Thanks,
Michal

-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform


-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 263 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131106/5254cb5d/attachment.pgp>