* [U-Boot] [PATCH] serial: zynq: Remove unused #defines
@ 2013-10-30 14:49 Michal Simek
2013-11-06 8:20 ` Michal Simek
2013-12-10 12:06 ` Albert ARIBAUD
0 siblings, 2 replies; 5+ messages in thread
From: Michal Simek @ 2013-10-30 14:49 UTC (permalink / raw)
To: u-boot
From: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
drivers/serial/serial_zynq.c | 4 ----
1 file changed, 4 deletions(-)
diff --git a/drivers/serial/serial_zynq.c b/drivers/serial/serial_zynq.c
index 050b9c0..ff28f3c 100644
--- a/drivers/serial/serial_zynq.c
+++ b/drivers/serial/serial_zynq.c
@@ -21,10 +21,6 @@
#define ZYNQ_UART_MR_PARITY_NONE 0x00000020 /* No parity mode */
-/* Some clock/baud constants */
-#define ZYNQ_UART_BDIV 15 /* Default/reset BDIV value */
-#define ZYNQ_UART_BASECLK 3125000L /* master / (bdiv + 1) */
-
struct uart_zynq {
u32 control; /* Control Register [8:0] */
u32 mode; /* Mode Register [10:0] */
--
1.8.2.3
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131030/f788657f/attachment.pgp>
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [U-Boot] [PATCH] serial: zynq: Remove unused #defines
2013-10-30 14:49 [U-Boot] [PATCH] serial: zynq: Remove unused #defines Michal Simek
@ 2013-11-06 8:20 ` Michal Simek
2013-12-10 12:06 ` Albert ARIBAUD
1 sibling, 0 replies; 5+ messages in thread
From: Michal Simek @ 2013-11-06 8:20 UTC (permalink / raw)
To: u-boot
Hi Tom,
On 10/30/2013 03:49 PM, Michal Simek wrote:
> From: Soren Brinkmann <soren.brinkmann@xilinx.com>
>
> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
> ---
> drivers/serial/serial_zynq.c | 4 ----
> 1 file changed, 4 deletions(-)
Can you please add this patch to your tree?
If you like, I can send you pull request but this is just
single patch which could go through directly.
Thanks,
Michal
--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 263 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131106/3e77938e/attachment.pgp>
^ permalink raw reply [flat|nested] 5+ messages in thread
* [U-Boot] [PATCH] serial: zynq: Remove unused #defines
2013-10-30 14:49 [U-Boot] [PATCH] serial: zynq: Remove unused #defines Michal Simek
2013-11-06 8:20 ` Michal Simek
@ 2013-12-10 12:06 ` Albert ARIBAUD
2013-12-10 12:11 ` Michal Simek
1 sibling, 1 reply; 5+ messages in thread
From: Albert ARIBAUD @ 2013-12-10 12:06 UTC (permalink / raw)
To: u-boot
Hi Michal,
On Wed, 30 Oct 2013 15:49:32 +0100, Michal Simek
<michal.simek@xilinx.com> wrote:
> From: Soren Brinkmann <soren.brinkmann@xilinx.com>
>
> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
> ---
> drivers/serial/serial_zynq.c | 4 ----
> 1 file changed, 4 deletions(-)
>
> diff --git a/drivers/serial/serial_zynq.c b/drivers/serial/serial_zynq.c
> index 050b9c0..ff28f3c 100644
> --- a/drivers/serial/serial_zynq.c
> +++ b/drivers/serial/serial_zynq.c
> @@ -21,10 +21,6 @@
>
> #define ZYNQ_UART_MR_PARITY_NONE 0x00000020 /* No parity mode */
>
> -/* Some clock/baud constants */
> -#define ZYNQ_UART_BDIV 15 /* Default/reset BDIV value */
> -#define ZYNQ_UART_BASECLK 3125000L /* master / (bdiv + 1) */
> -
> struct uart_zynq {
> u32 control; /* Control Register [8:0] */
> u32 mode; /* Mode Register [10:0] */
> --
> 1.8.2.3
>
Applied to u-boot-arm/master, thanks!
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 5+ messages in thread
* [U-Boot] [PATCH] serial: zynq: Remove unused #defines
2013-12-10 12:06 ` Albert ARIBAUD
@ 2013-12-10 12:11 ` Michal Simek
2013-12-10 12:21 ` Albert ARIBAUD
0 siblings, 1 reply; 5+ messages in thread
From: Michal Simek @ 2013-12-10 12:11 UTC (permalink / raw)
To: u-boot
On 12/10/2013 01:06 PM, Albert ARIBAUD wrote:
> Hi Michal,
>
> On Wed, 30 Oct 2013 15:49:32 +0100, Michal Simek
> <michal.simek@xilinx.com> wrote:
>
>> From: Soren Brinkmann <soren.brinkmann@xilinx.com>
>>
>> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
>> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
>> ---
>> drivers/serial/serial_zynq.c | 4 ----
>> 1 file changed, 4 deletions(-)
>>
>> diff --git a/drivers/serial/serial_zynq.c b/drivers/serial/serial_zynq.c
>> index 050b9c0..ff28f3c 100644
>> --- a/drivers/serial/serial_zynq.c
>> +++ b/drivers/serial/serial_zynq.c
>> @@ -21,10 +21,6 @@
>>
>> #define ZYNQ_UART_MR_PARITY_NONE 0x00000020 /* No parity mode */
>>
>> -/* Some clock/baud constants */
>> -#define ZYNQ_UART_BDIV 15 /* Default/reset BDIV value */
>> -#define ZYNQ_UART_BASECLK 3125000L /* master / (bdiv + 1) */
>> -
>> struct uart_zynq {
>> u32 control; /* Control Register [8:0] */
>> u32 mode; /* Mode Register [10:0] */
>> --
>> 1.8.2.3
>>
>
> Applied to u-boot-arm/master, thanks!
This has been already applied to Tom's tree.
Thanks,
Michal
--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 263 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131210/71cf38ba/attachment.pgp>
^ permalink raw reply [flat|nested] 5+ messages in thread
* [U-Boot] [PATCH] serial: zynq: Remove unused #defines
2013-12-10 12:11 ` Michal Simek
@ 2013-12-10 12:21 ` Albert ARIBAUD
0 siblings, 0 replies; 5+ messages in thread
From: Albert ARIBAUD @ 2013-12-10 12:21 UTC (permalink / raw)
To: u-boot
Hi Michal,
On Tue, 10 Dec 2013 13:11:47 +0100, Michal Simek <monstr@monstr.eu>
wrote:
> On 12/10/2013 01:06 PM, Albert ARIBAUD wrote:
> > Hi Michal,
> >
> > On Wed, 30 Oct 2013 15:49:32 +0100, Michal Simek
> > <michal.simek@xilinx.com> wrote:
> >
> >> From: Soren Brinkmann <soren.brinkmann@xilinx.com>
> >>
> >> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
> >> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
> >> ---
> >> drivers/serial/serial_zynq.c | 4 ----
> >> 1 file changed, 4 deletions(-)
> >>
> >> diff --git a/drivers/serial/serial_zynq.c b/drivers/serial/serial_zynq.c
> >> index 050b9c0..ff28f3c 100644
> >> --- a/drivers/serial/serial_zynq.c
> >> +++ b/drivers/serial/serial_zynq.c
> >> @@ -21,10 +21,6 @@
> >>
> >> #define ZYNQ_UART_MR_PARITY_NONE 0x00000020 /* No parity mode */
> >>
> >> -/* Some clock/baud constants */
> >> -#define ZYNQ_UART_BDIV 15 /* Default/reset BDIV value */
> >> -#define ZYNQ_UART_BASECLK 3125000L /* master / (bdiv + 1) */
> >> -
> >> struct uart_zynq {
> >> u32 control; /* Control Register [8:0] */
> >> u32 mode; /* Mode Register [10:0] */
> >> --
> >> 1.8.2.3
> >>
> >
> > Applied to u-boot-arm/master, thanks!
>
> This has been already applied to Tom's tree.
Well then, it was in my patchwork todo in error. :)
But never mind: it'll merge just fine, that's what git is for.
> Thanks,
> Michal
Amicalement,
--
Albert.
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2013-12-10 12:21 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-10-30 14:49 [U-Boot] [PATCH] serial: zynq: Remove unused #defines Michal Simek
2013-11-06 8:20 ` Michal Simek
2013-12-10 12:06 ` Albert ARIBAUD
2013-12-10 12:11 ` Michal Simek
2013-12-10 12:21 ` Albert ARIBAUD
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox