[U-Boot] [PATCH 07/34] zynq: Add UART0, UART1 configs support

[Dinh Nguyen <dinh.linux@gmail.com>]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512


On 11/6/13 12:45 AM, Michal Simek wrote:
> On 11/06/2013 05:17 AM, Dinh Nguyen wrote:
>>
>> On 11/5/13 11:46 AM, Jagannadha Sutradharudu Teki wrote:
>>> Zynq uart controller support two serial ports like
>>> CONFIG_ZYNQ_SERIAL_UART0 and CONFIG_ZYNQ_SERIAL_UART1
>>> enabled both so-that the respective board will define
>>> these macros based on their usage.
>>>
>>> Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
>>> ---
>>>  include/configs/zynq.h | 20 ++++++++++++++++----
>>>  1 file changed, 16 insertions(+), 4 deletions(-)
>>>
>>> diff --git a/include/configs/zynq.h b/include/configs/zynq.h
>>> index f32008b..1bcb28d 100644
>>> --- a/include/configs/zynq.h
>>> +++ b/include/configs/zynq.h
>>> @@ -33,10 +33,22 @@
>>>      {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200,
230400}
>>> 
>>>  /* Zynq Serial driver */
>>> -#define CONFIG_ZYNQ_SERIAL
>>> -#define CONFIG_ZYNQ_SERIAL_BASEADDR0    0xE0001000
>>> -#define CONFIG_ZYNQ_SERIAL_BAUDRATE0    CONFIG_BAUDRATE
>>> -#define CONFIG_ZYNQ_SERIAL_CLOCK0    50000000
>>> +#define CONFIG_ZYNQ_SERIAL_UART1
>>> +#ifdef CONFIG_ZYNQ_SERIAL_UART0
>>> +# define CONFIG_ZYNQ_SERIAL_BASEADDR0    0xE0000000
>>> +# define CONFIG_ZYNQ_SERIAL_BAUDRATE0    CONFIG_BAUDRATE
>> Why couldn't you just use CONFIG_BAUDRATE? Why do you need to add
>> another define?
>
> If we start to use the same CONFIG_BAUDRATE(or better gd->baudrate)
> in the driver then we lose config options to setup different baudrate
> for every single device.
>
> I haven't seen any code for SERIAL_MULTI if you want to configure
> 2 serial drivers but on different baudrate.
> If there is better way how to do it please let us know.
I guess the question then is what would be the use case for supporting
different baudrates on different device?

Dinh
>
>
> Thanks,
> Michal
>

-----BEGIN PGP SIGNATURE-----
Version: GnuPG/MacGPG2 v2.0.22 (Darwin)
Comment: GPGTools - https://gpgtools.org
Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/
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=O22Y
-----END PGP SIGNATURE-----