[U-Boot] [PATCH 01/10 V6] EXYNOS5: Create a common board file

[Przemyslaw Marczak <p.marczak@samsung.com>]

Hi,

On 11/08/2013 09:37 AM, Rajeshwari Birje wrote:
> Hi Przemyslaw
>
> On Fri, Nov 8, 2013 at 1:43 PM, Przemyslaw Marczak
> <p.marczak@samsung.com> wrote:
>> Hello Rajeshwari,
>>
>>
>> On 10/29/2013 08:23 AM, Rajeshwari S Shinde wrote:
>>>
>>> Create a common board.c file for all functions which are common across
>>> all EXYNOS5 platforms.
>>>
>>> exynos_init function is provided for platform specific code.
>>>
>>> Signed-off-by: Rajeshwari S Shinde <rajeshwari.s@samsung.com>
>>> Acked-by: Simon Glass <sjg@chromium.org>
>>> ---
>>> Changes in V2:
>>>          - None
>>> Changes in V3:
>>>          - None
>>> Changes in V4:
>>>          - Added check for the compilation of MAX77686 pmic.
>>> Changes in V5:
>>>          - Moved board_eth_init and board_mmc_init in case of
>>>          device tree support
>>> Changes in V6:
>>>          - None.
>>>    arch/arm/include/asm/arch-exynos/board.h |  17 ++
>>>    board/samsung/common/Makefile            |   4 +
>>>    board/samsung/common/board.c             | 405
>>> +++++++++++++++++++++++++++++++
>>>    board/samsung/smdk5250/exynos5-dt.c      | 361
>>> +--------------------------
>>>    board/samsung/smdk5250/smdk5250.c        | 182 +-------------
>>>    include/configs/exynos5250-dt.h          |   2 +
>>>    6 files changed, 435 insertions(+), 536 deletions(-)
>>>    create mode 100644 arch/arm/include/asm/arch-exynos/board.h
>>>    create mode 100644 board/samsung/common/board.c
>>>
>>
>> The name of exynos5 common file can't be just "board.c" since it is common
>> only for Exynos5 boards and is placed in Samsung common.
>> We have few Exynos4 boards in u-boot and in future we can introduce common
>> board file for them too.
>> So it is better to add some additional word to this file name. This also
>> needs to change config name or add checking SOC version in common Makefile.
>>
> Cannot we use the same file even for exynos4 boards.
>

I'm not sure that you understand my intention.

You want to introduce:
board/samsung/common/board.c - with only Exynos5 code

I mean that it should looks like this, e.g:
"board/samsung/common/board_exynos4.c" - common code for all Exynos 4
"board/samsung/common/board_exynos5.c" - common code for all Exynos 5
since there is some duplicated code in Exynos4 boards that can be moved 
to one common file in the future.
Do you understand my intention now?

Regards

-- 
Przemyslaw Marczak
Samsung R&D Institute Poland
Samsung Electronics
p.marczak at samsung.com