From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lubomir Popov Date: Wed, 20 Nov 2013 15:32:17 +0200 Subject: [U-Boot] [PATCH] ARM: OMAP4: Fix bug in omap4470_volts struct Message-ID: <528CB9E1.3040200@mm-sol.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de The struct incorrectly referenced SMPS1 for all three power domains. Fixed this by using SMPS2 and SMPS5 as appropriate. Add some comments and choose voltage values that correspond to voltage selection codes. Signed-off-by: Lubomir Popov --- arch/arm/cpu/armv7/omap4/hw_data.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/arch/arm/cpu/armv7/omap4/hw_data.c b/arch/arm/cpu/armv7/omap4/hw_data.c index 6a225c8..1b2f439 100644 --- a/arch/arm/cpu/armv7/omap4/hw_data.c +++ b/arch/arm/cpu/armv7/omap4/hw_data.c @@ -288,17 +288,21 @@ struct vcores_data omap4460_volts = { .mm.pmic = &twl6030, }; +/* + * Take closest integer part of the mV value corresponding to a TWL6032 SMPS + * voltage selection code. Aligned with OMAP4470 ES1.0 OCA V.0.7. + */ struct vcores_data omap4470_volts = { - .mpu.value = 1200, + .mpu.value = 1202, .mpu.addr = SMPS_REG_ADDR_SMPS1, .mpu.pmic = &twl6030, .core.value = 1126, - .core.addr = SMPS_REG_ADDR_SMPS1, + .core.addr = SMPS_REG_ADDR_SMPS2, .core.pmic = &twl6030, - .mm.value = 1137, - .mm.addr = SMPS_REG_ADDR_SMPS1, + .mm.value = 1139, + .mm.addr = SMPS_REG_ADDR_SMPS5, .mm.pmic = &twl6030, }; -- 1.7.9.5