[U-Boot] [PATCH 0/4] Wandboard support for Future Eletronics 7" WVGA LCD extension board

[Stefano Babic <sbabic@denx.de>]

Hi Otavio,

On 22/10/2013 01:34, Otavio Salvador wrote:
> This patchset adds support for the Future Eletronics 7" WVGA LCD
> extension board and implements its auto-detection using i2c to check
> for it's touch controller presence.
> 
> The IOMUXC change is included here as it makes both SoC type MUX
> settings in line to each other and took a while to figure out why it
> worked with one and failed with another SoC.
> 
> 
> Otavio Salvador (4):
>   mx6: Remove PAD_CTL_DSE_120ohm from i.MX6DL's IPU1_DI0_PIN4 pin
>   wandboard: add Future Eletronics 7" WVGA LCD extension board
>   wandboard: Use '0' as bootdelay but interruptable
>   wandboard: Pass 'quiet' bootparam by default
> 
>  arch/arm/include/asm/arch-mx6/mx6dl_pins.h |   2 +-
>  board/wandboard/wandboard.c                | 238 ++++++++++++++++++++++++++---
>  include/configs/wandboard.h                |  38 ++++-
>  3 files changed, 254 insertions(+), 24 deletions(-)

I confess that I hoped that Simon's patches to extract the env from the
board configuration file could be merged very soon into mainline, but
they are not yet merged, and I am blocking some patches, mostly
Otavio's. Again, there is also patches adding new feature as this one
for the Future Electronics display, that contains also many additions to
CONFIG_EXTRA_ENV_SETTINGS.

I will apply the patch for Future's display - it is much more as only a
change to default environment - but I am still confident that we can do
in the right way once and I will let the other patches in my queue.

Otavio, this regards your patches:
	http://patchwork.ozlabs.org/patch/285295/
	http://patchwork.ozlabs.org/patch/285296/
	http://patchwork.ozlabs.org/patch/285294/

Best regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================