From: Stefano Babic <sbabic@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] configs: imx: Remove CONFIG_SYS_SPD_BUS_NUM option
Date: Thu, 21 Nov 2013 16:15:14 +0100 [thread overview]
Message-ID: <528E2382.3080107@denx.de> (raw)
In-Reply-To: <1384987090-29359-1-git-send-email-festevam@gmail.com>
On 20/11/2013 23:38, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@freescale.com>
>
> According to the README:
>
> "- CONFIG_SYS_SPD_BUS_NUM
> If SPD EEPROM is on an I2C bus other than the first
> one, specify here. Note that the value must resolve
> to something your driver can deal with."
>
> There is no SPD EEPROM on the imx boards, so ged rid of this option.
>
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---
> include/configs/imx31_phycore.h | 1 -
> include/configs/mx25pdk.h | 1 -
> include/configs/mx35pdk.h | 1 -
> include/configs/mx53ard.h | 1 -
> include/configs/mx53evk.h | 1 -
> include/configs/mx53loco.h | 1 -
> include/configs/mx53smd.h | 1 -
> 7 files changed, 7 deletions(-)
>
> diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h
> index 7b55695..ffb67c2 100644
> --- a/include/configs/imx31_phycore.h
> +++ b/include/configs/imx31_phycore.h
> @@ -37,7 +37,6 @@
>
> #define CONFIG_SYS_I2C
> #define CONFIG_SYS_I2C_MXC
> -#define CONFIG_SYS_SPD_BUS_NUM 1 /* I2C2 */
> #define CONFIG_SYS_I2C_CLK_OFFSET I2C2_CLK_OFFSET
>
> #define CONFIG_MXC_UART
> diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h
> index fb564b0..af6aafa 100644
> --- a/include/configs/mx25pdk.h
> +++ b/include/configs/mx25pdk.h
> @@ -115,7 +115,6 @@
> #define CONFIG_CMD_I2C
> #define CONFIG_SYS_I2C
> #define CONFIG_SYS_I2C_MXC
> -#define CONFIG_SYS_SPD_BUS_NUM 0 /* I2C1 */
>
> /* RTC */
> #define CONFIG_RTC_IMXDI
> diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h
> index 4b4503c..0a46f4c 100644
> --- a/include/configs/mx35pdk.h
> +++ b/include/configs/mx35pdk.h
> @@ -42,7 +42,6 @@
> */
> #define CONFIG_SYS_I2C
> #define CONFIG_SYS_I2C_MXC
> -#define CONFIG_SYS_SPD_BUS_NUM 0 /* I2C1 */
> #define CONFIG_MXC_SPI
> #define CONFIG_MXC_GPIO
>
> diff --git a/include/configs/mx53ard.h b/include/configs/mx53ard.h
> index 60c40c8..797a637 100644
> --- a/include/configs/mx53ard.h
> +++ b/include/configs/mx53ard.h
> @@ -46,7 +46,6 @@
> #define CONFIG_CMD_I2C
> #define CONFIG_SYS_I2C
> #define CONFIG_SYS_I2C_MXC
> -#define CONFIG_SYS_SPD_BUS_NUM 1 /* I2C2 */
>
> /* MMC Configs */
> #define CONFIG_FSL_ESDHC
> diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h
> index d0b5258..3f0d80a 100644
> --- a/include/configs/mx53evk.h
> +++ b/include/configs/mx53evk.h
> @@ -39,7 +39,6 @@
> #define CONFIG_CMD_I2C
> #define CONFIG_SYS_I2C
> #define CONFIG_SYS_I2C_MXC
> -#define CONFIG_SYS_SPD_BUS_NUM 1 /* I2C2 */
>
> /* PMIC Configs */
> #define CONFIG_POWER
> diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h
> index 7b735ab..ae43ea3 100644
> --- a/include/configs/mx53loco.h
> +++ b/include/configs/mx53loco.h
> @@ -73,7 +73,6 @@
> /* I2C Configs */
> #define CONFIG_SYS_I2C
> #define CONFIG_SYS_I2C_MXC
> -#define CONFIG_SYS_SPD_BUS_NUM 0 /* I2C1 */
>
> /* PMIC Controller */
> #define CONFIG_POWER
> diff --git a/include/configs/mx53smd.h b/include/configs/mx53smd.h
> index c9618b4..a04e7c7 100644
> --- a/include/configs/mx53smd.h
> +++ b/include/configs/mx53smd.h
> @@ -36,7 +36,6 @@
> #define CONFIG_CMD_I2C
> #define CONFIG_SYS_I2C
> #define CONFIG_SYS_I2C_MXC
> -#define CONFIG_SYS_SPD_BUS_NUM 1 /* I2C2 */
>
> /* MMC Configs */
> #define CONFIG_FSL_ESDHC
>
Acked-by: Stefano Babic <sbabic@denx.de>
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
next prev parent reply other threads:[~2013-11-21 15:15 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-20 22:38 [U-Boot] [PATCH] configs: imx: Remove CONFIG_SYS_SPD_BUS_NUM option Fabio Estevam
2013-11-21 15:15 ` Stefano Babic [this message]
2013-12-17 17:42 ` Stefano Babic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=528E2382.3080107@denx.de \
--to=sbabic@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox