public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: York Sun <yorksun@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 1/4] net/fman: Add support for 10GEC3 and 10GEC4
Date: Thu, 21 Nov 2013 09:51:17 -0800	[thread overview]
Message-ID: <528E4815.1040202@freescale.com> (raw)
In-Reply-To: <1384428714-31229-1-git-send-email-Shengzhou.Liu@freescale.com>

On 11/14/2013 03:31 AM, Shengzhou Liu wrote:
> There are more than two 10GEC in single FMAN in some SoCs(e.g. T2080).
> This patch adds support for 10GEC3 and 10GEC4.
> 
> Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
> ---
> Against master branch of upstream.
> 
>  arch/powerpc/include/asm/fsl_serdes.h |  2 ++
>  arch/powerpc/include/asm/immap_85xx.h |  2 ++
>  drivers/net/fm/eth.c                  |  8 ++++++--
>  drivers/net/fm/fm.h                   |  2 ++
>  drivers/net/fm/init.c                 | 18 ++++++++++++++----
>  include/fm_eth.h                      | 18 ++++++++++++++++++
>  6 files changed, 44 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/powerpc/include/asm/fsl_serdes.h b/arch/powerpc/include/asm/fsl_serdes.h
> index cce892c..404ded4 100644
> --- a/arch/powerpc/include/asm/fsl_serdes.h
> +++ b/arch/powerpc/include/asm/fsl_serdes.h
> @@ -62,6 +62,8 @@ enum srds_prtcl {
>  	QSGMII_FM1_B,		/* B indicates MACs 5,6,9,10 */
>  	QSGMII_FM2_A,
>  	QSGMII_FM2_B,
> +	XFI_FM1_MAC1,
> +	XFI_FM1_MAC2,
>  	XFI_FM1_MAC9,
>  	XFI_FM1_MAC10,
>  	XFI_FM2_MAC9,
> diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
> index 060e0d7..e47da1d 100644
> --- a/arch/powerpc/include/asm/immap_85xx.h
> +++ b/arch/powerpc/include/asm/immap_85xx.h
> @@ -1717,6 +1717,8 @@ typedef struct ccsr_gur {
>  #define FSL_CORENET_DEVDISR2_DTSEC1_10	0x00400000
>  #define FSL_CORENET_DEVDISR2_10GEC1_1	0x00800000
>  #define FSL_CORENET_DEVDISR2_10GEC1_2	0x00400000
> +#define FSL_CORENET_DEVDISR2_10GEC1_3	0x80000000
> +#define FSL_CORENET_DEVDISR2_10GEC1_4	0x40000000
>  #define FSL_CORENET_DEVDISR2_DTSEC2_1	0x00080000
>  #define FSL_CORENET_DEVDISR2_DTSEC2_2	0x00040000
>  #define FSL_CORENET_DEVDISR2_DTSEC2_3	0x00020000
> diff --git a/drivers/net/fm/eth.c b/drivers/net/fm/eth.c
> index cb099cd..e346cd2 100644
> --- a/drivers/net/fm/eth.c
> +++ b/drivers/net/fm/eth.c
> @@ -557,8 +557,12 @@ static int fm_eth_init_mac(struct fm_eth *fm_eth, struct ccsr_fman *reg)
>  	num = fm_eth->num;
>  
>  #ifdef CONFIG_SYS_FMAN_V3
> -	if (fm_eth->type == FM_ETH_10G_E)
> -		num += 8;
> +	if (fm_eth->type == FM_ETH_10G_E) {
> +		if (fm_eth->num >= 2)
> +			num -= 2;
> +		else
> +			num += 8;
> +	}

It would be nice if you can add some comments here.


>  	base = &reg->memac[num].fm_memac;
>  	phyregs = &reg->memac[num].fm_memac_mdio;
>  #else
> diff --git a/drivers/net/fm/fm.h b/drivers/net/fm/fm.h
> index 3ec49a4..43de114 100644
> --- a/drivers/net/fm/fm.h
> +++ b/drivers/net/fm/fm.h
> @@ -18,9 +18,11 @@
>  #define RX_PORT_1G_BASE		0x08
>  #define MAX_NUM_RX_PORT_1G	CONFIG_SYS_NUM_FM1_DTSEC
>  #define RX_PORT_10G_BASE	0x10
> +#define RX_PORT_10G_BASE2	0x08
>  #define TX_PORT_1G_BASE		0x28
>  #define MAX_NUM_TX_PORT_1G	CONFIG_SYS_NUM_FM1_DTSEC
>  #define TX_PORT_10G_BASE	0x30
> +#define TX_PORT_10G_BASE2	0x28
>  #define MIIM_TIMEOUT    0xFFFF
>  
>  struct fm_muram {
> diff --git a/drivers/net/fm/init.c b/drivers/net/fm/init.c
> index 35edd7a..cd787f4 100644
> --- a/drivers/net/fm/init.c
> +++ b/drivers/net/fm/init.c
> @@ -64,6 +64,12 @@ struct fm_eth_info fm_info[] = {
>  #if (CONFIG_SYS_NUM_FM1_10GEC >= 2)
>  	FM_TGEC_INFO_INITIALIZER(1, 2),
>  #endif
> +#if (CONFIG_SYS_NUM_FM1_10GEC >= 3)
> +	FM_TGEC_INFO_INITIALIZER2(1, 3),
> +#endif
> +#if (CONFIG_SYS_NUM_FM1_10GEC >= 4)
> +	FM_TGEC_INFO_INITIALIZER2(1, 4),
> +#endif
>  #if (CONFIG_SYS_NUM_FM2_10GEC >= 1)
>  	FM_TGEC_INFO_INITIALIZER(2, 1),
>  #endif
> @@ -239,10 +245,14 @@ static void ft_fixup_port(void *blob, struct fm_eth_info *info, char *prop)
>  	 * FM1_10GEC1 is enabled and  FM1_DTSEC9 is disabled, ensure that the
>  	 * dual-role MAC is not disabled, ditto for other dual-role MACs.
>  	 */

Revise this comment to match your change.


> -	if (((info->port == FM1_DTSEC9) && (PORT_IS_ENABLED(FM1_10GEC1)))	||
> -	    ((info->port == FM1_DTSEC10) && (PORT_IS_ENABLED(FM1_10GEC2)))	||
> -	    ((info->port == FM1_10GEC1) && (PORT_IS_ENABLED(FM1_DTSEC9)))	||
> -	    ((info->port == FM1_10GEC2) && (PORT_IS_ENABLED(FM1_DTSEC10)))
> +	if (((info->port == FM1_DTSEC9) && (PORT_IS_ENABLED(FM1_10GEC1)))  ||
> +	    ((info->port == FM1_DTSEC10) && (PORT_IS_ENABLED(FM1_10GEC2))) ||
> +	    ((info->port == FM1_DTSEC1) && (PORT_IS_ENABLED(FM1_10GEC3)))  ||
> +	    ((info->port == FM1_DTSEC2) && (PORT_IS_ENABLED(FM1_10GEC4)))  ||
> +	    ((info->port == FM1_10GEC1) && (PORT_IS_ENABLED(FM1_DTSEC9)))  ||
> +	    ((info->port == FM1_10GEC2) && (PORT_IS_ENABLED(FM1_DTSEC10))) ||
> +	    ((info->port == FM1_10GEC3) && (PORT_IS_ENABLED(FM1_DTSEC1)))  ||
> +	    ((info->port == FM1_10GEC4) && (PORT_IS_ENABLED(FM1_DTSEC2)))

York

  reply	other threads:[~2013-11-21 17:51 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-11-14 11:31 [U-Boot] [PATCH 1/4] net/fman: Add support for 10GEC3 and 10GEC4 Shengzhou Liu
2013-11-21 17:51 ` York Sun [this message]
2013-11-22  3:19   ` Shengzhou Liu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=528E4815.1040202@freescale.com \
    --to=yorksun@freescale.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox