From mboxrd@z Thu Jan 1 00:00:00 1970 From: Alexey Smishlayev Date: Wed, 27 Nov 2013 14:26:38 +0200 Subject: [U-Boot] Compiling U-Boot Message-ID: <5295E4FE.3000004@xtech2.lv> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello! I would like to compile U-Boot with custom configuration. I downloaded source from the master git repository (http://git.denx.de/?p=u-boot.git;a=summary). I am trying to compile using following commands: $ cd u-boot/ $ make ARCH=arm CROSS_COMPILE=arm-unknown-linux-gnu- at91sam9g20ek_nandflash_config $ make ARCH=arm CROSS_COMPILE=arm-unknown-linux-gnu- all It goes on for a while, and then I get the error: crt0.S: Assembler messages: crt0.S:70: Error: register expected, not '#(184)' -- `sub sp,#(184)' make[1]: *** [crt0.o] Error 1 make[1]: Leaving directory `/root/u-boot/arch/arm/lib' make: *** [arch/arm/lib/built-in.o] Error 2 The "arm-unknown-linux-gnu-" is a toolchain prefix for my devboard. I am trying to compile on 64bit Ubuntu computer. I have also tried 32bit debian lenny virtual machine. Can I correct this error or is there something I am doing wrong? Best regards, Alexey Smishlayev