From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Thu, 28 Nov 2013 09:20:22 +0100 Subject: [U-Boot] [PATCH 5/5] ARM: mx6: Enable PCIe on Sabrelite In-Reply-To: <52961B8D.5070205@boundarydevices.com> References: <1384186966-6054-1-git-send-email-marex@denx.de> <1384186966-6054-5-git-send-email-marex@denx.de> <52961B8D.5070205@boundarydevices.com> Message-ID: <5296FCC6.8020802@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Eric, Marek, On 27/11/2013 17:19, Eric Nelson wrote: > It seems to lock up the system if you don't have the proper > device connected. > > Without this bit, I was able to confirm proper enumeration > of a PCIe bus with a USB 3.0 controller: > > 00:01.0 - 16c3:abcd - Bridge device > 01:00.0 - 1b21:0612 - Mass storage controller > > Unfortunately, in a quick test, the image fails to boot > without a PCIe device connected, or oddly, with a different > PCIe ethernet controller connected. > > I think it's handy to have the placeholder here, but > I think you're the only person on the planet with the > right set of components to make it work at the moment. Waiting for someone from Mars is coming to help Marek, I'll put the patchset in the -next for better testing. Best regards, Stefano -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================