From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Thu, 28 Nov 2013 09:23:40 +0100 Subject: [U-Boot] [PATCH v2 0/4] udoo: Move and optimize platform register setting. In-Reply-To: <1384533774-3233-1-git-send-email-giuseppe.pagano@seco.com> References: <1384533774-3233-1-git-send-email-giuseppe.pagano@seco.com> Message-ID: <5296FD8C.7020502@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 15/11/2013 17:42, Giuseppe Pagano wrote: > Previous uDoo configuration adopts register settings for DDR3, clock, muxing, > etc. taken from Nitrogen6x. uDoo schematics is rather different from that board, > and it needs customized setting for most of the registers. > All this changes can be considered atomical since it is part of initial support > of the board. > > Patch changes uDoo configuration files path to a specific one, and adopt > optimized value for every configured register. > > Signed-off-by: Giuseppe Pagano > Tested-by: Fabio Estevam > CC: Stefano Babic > CC: Fabio Estevam > --- Applied to u-boot-imx, thanks. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================