From mboxrd@z Thu Jan  1 00:00:00 1970
From: Przemyslaw Marczak <p.marczak@samsung.com>
Date: Thu, 28 Nov 2013 10:16:17 +0100
Subject: [U-Boot] [PATCH] s5p: gpio: change gpio coding method for s5p
	gpio.
In-Reply-To: <1384344115-3137-1-git-send-email-p.marczak@samsung.com>
References: <1384344115-3137-1-git-send-email-p.marczak@samsung.com>
Message-ID: <529709E1.8080209@samsung.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hello Minkyu,

On 11/13/2013 01:01 PM, Przemyslaw Marczak wrote:
> Old s5p gpio coding method returns bad bank address in few cases.
> Now it is working properly with every gpio part bank and pin
> and it is easy to extend.
>
> Gpio coding mask:
> 0x000000ff - pin number
> 0x00ffff00 - bank offset
> 0xff000000 - part number
>
> Tested on: Goni, Universal, Trats, Trats2.
>
> Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
> CC: Minkyu Kang <mk7.kang@samsung.com>

Could you review this patch, please?
Thanks
-- 
Przemyslaw Marczak
Samsung R&D Institute Poland
Samsung Electronics
p.marczak at samsung.com