[U-Boot] [PATCH 5/5] ARM: mx6: Enable PCIe on Sabrelite

[Stefano Babic <sbabic@denx.de>]

Hi Eric,

On 03/12/2013 02:05, Eric Nelson wrote:

> 
> I think I already had this patch. I tested with these
> patches against Stefano's master branch:
> 
> 0001-ARM-mx6-Update-non-Freescale-boards-to-include-CPU-e.patch
> 0002-ARM-armv7-Make-indirect-vector-addresses-globl.patch
> 0003-ARM-lib-Add-cpu_clock_teardown-call.patch
> 0004-ARM-mx6-Add-PCI-express-clock-configuration.patch
> 0005-ARM-mx6-Add-PCI-express-driver.patch
> 0006-ARM-mx6-Enable-PCIe-on-Sabrelite.patch
> 
> I also apologize for some bad information the other day.
> 
> I saw (and reported) lock-ups during PCIE bus enumeration,
> but I can't seem to reproduce them tonight.
> 
> I've tested against three different PCIe devices, and with
> nothing connected, and everything boots.
> 
> As I mentioned, we don't have one of the ethernet
> adapters you're using, but this patch set doesn't appear to
> break anything.
> 
> I'll try on some other boards over the coming days and
> let you know if I see any issues.

Thanks for testing. I will let the patchset on -next until your
feedback. If boards can boot flawlessly, I will merge it into -master.

Best regards,
Stefano


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================