From mboxrd@z Thu Jan 1 00:00:00 1970 From: Michal Simek Date: Fri, 20 Dec 2013 10:46:21 +0100 Subject: [U-Boot] Unable to boot the system In-Reply-To: References: Message-ID: <52B411ED.90301@monstr.eu> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi, On 12/19/2013 10:27 PM, Tingyu He wrote: > Hello, > > > I have set up my system with two boards ZC706 from Xilinx and > AD-FMCOMMS2-EBZ from ADI. Then I built the boot images and prepared them in > the SD card as per the following wiki page: > > http://wiki.analog.com/resources/eval/user-guides/ad-fmcomms2-ebz/software/linux/zynq > > > I met some problems with my built u-boot.elf file. The boot image BOOT.BIN > generated from my built u-boot.elf does not work. I attached the screen > capture of the error messages when booting the system from SD card. > > > > Below are the steps of how I built the u-boot.elf. > > 1) Download Xilinx u-boot source code from > https://github.com/Xilinx/u-boot-xlnx > > > > 2) Follow the instructions on that wiki page to compile the code to > generate the u-boot (.elf) file. > > root at l1-desktop:~/u-boot-xlnx-master# *export ARCH=arm* > > root at l1-desktop:~/u-boot-xlnx-master# *export > CROSS_COMPILE=arm-xilinx-linux-gnueabi-* > > root at l1-desktop:~/u-boot-xlnx-master# *make zynq_zc70x_config* > > root at l1-desktop:~/u-boot-xlnx-master# *make all* > > > > Did I miss something before "make"? Can anyone help me with the problem? You should ask questions like this at git at xilinx.com if you are using non mainline xilinx u-boot. I will reply your email privately. Thanks, Michal -- Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/ Maintainer of Linux kernel - Xilinx Zynq ARM architecture Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 263 bytes Desc: OpenPGP digital signature URL: