[U-Boot] Unable to boot the system

[U-Boot] Unable to boot the system

[Tingyu He]

Hello,


I have set up my system with two boards ZC706 from Xilinx and
AD-FMCOMMS2-EBZ from ADI. Then I built the boot images and prepared them in
the SD card as per the following wiki page:

http://wiki.analog.com/resources/eval/user-guides/ad-fmcomms2-ebz/software/linux/zynq


I met some problems with my built u-boot.elf file. The boot image BOOT.BIN
generated from my built u-boot.elf does not work. I attached the screen
capture of the error messages when booting the system from SD card.



Below are the steps of how I built the u-boot.elf.

1) Download Xilinx u-boot source code from
https://github.com/Xilinx/u-boot-xlnx



2) Follow the instructions on that wiki page to compile the code to
generate the u-boot (.elf) file.

root at l1-desktop:~/u-boot-xlnx-master# *export ARCH=arm*

root at l1-desktop:~/u-boot-xlnx-master# *export
CROSS_COMPILE=arm-xilinx-linux-gnueabi-*

root at l1-desktop:~/u-boot-xlnx-master# *make zynq_zc70x_config*

root at l1-desktop:~/u-boot-xlnx-master# *make all*



Did I miss something before "make"? Can anyone help me with the problem?



Thank you very much!



Hetty
-------------- next part --------------
A non-text attachment was scrubbed...
Name: boot_screen.jpg
Type: image/jpeg
Size: 1728054 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131219/3eaead74/attachment-0001.jpg>

[U-Boot] Unable to boot the system

[Michal Simek]

Hi,

On 12/19/2013 10:27 PM, Tingyu He wrote:
> Hello,
> 
> 
> I have set up my system with two boards ZC706 from Xilinx and
> AD-FMCOMMS2-EBZ from ADI. Then I built the boot images and prepared them in
> the SD card as per the following wiki page:
> 
> http://wiki.analog.com/resources/eval/user-guides/ad-fmcomms2-ebz/software/linux/zynq
> 
> 
> I met some problems with my built u-boot.elf file. The boot image BOOT.BIN
> generated from my built u-boot.elf does not work. I attached the screen
> capture of the error messages when booting the system from SD card.
> 
> 
> 
> Below are the steps of how I built the u-boot.elf.
> 
> 1) Download Xilinx u-boot source code from
> https://github.com/Xilinx/u-boot-xlnx
> 
> 
> 
> 2) Follow the instructions on that wiki page to compile the code to
> generate the u-boot (.elf) file.
> 
> root at l1-desktop:~/u-boot-xlnx-master# *export ARCH=arm*
> 
> root at l1-desktop:~/u-boot-xlnx-master# *export
> CROSS_COMPILE=arm-xilinx-linux-gnueabi-*
> 
> root at l1-desktop:~/u-boot-xlnx-master# *make zynq_zc70x_config*
> 
> root at l1-desktop:~/u-boot-xlnx-master# *make all*
> 
> 
> 
> Did I miss something before "make"? Can anyone help me with the problem?

You should ask questions like this at git at xilinx.com if you are using
non mainline xilinx u-boot.

I will reply your email privately.

Thanks,
Michal


-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform


-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 263 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20131220/c27c67c1/attachment.pgp>