[U-Boot] [PATCH 2/7 V3] mmc: Get secure erase information from card

[Jaehoon Chung <jh80.chung@samsung.com>]

Hi, Haijun.

On 12/10/2013 02:39 PM, Haijun Zhang wrote:
> Read command class from csd register and secure erase
> support bit from ext csd register. Also calculate the erase
> timeout and secure erase timeout.
> 
> If read ext csd error, error status should be returned instead of
> give some incorrect information.
> 
> Error log:
> =>
> => mmcinfo
> Device: FSL_SDHC
> Manufacturer ID: 0
> OEM: 0
> Name: Tran Speed: 0
> Rd Block Len: 0
> MMC version 0.0
> High Capacity: No
> Capacity: 0 Bytes
> Bus Width: 1-bit
> =>
> 
> Signed-off-by: Haijun Zhang <haijun.zhang@freescale.com>
> ---
> changes for V3:
> 	- Change the erase group size to be block aligned.
> 
>  drivers/mmc/mmc.c | 52 ++++++++++++++++++++++++++++++++++++++--------------
>  1 file changed, 38 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
> index e1461a9..e8dbb8c 100644
> --- a/drivers/mmc/mmc.c
> +++ b/drivers/mmc/mmc.c
> @@ -871,6 +871,8 @@ static int mmc_startup(struct mmc *mmc)
>  		}
>  	}
>  
> +	mmc->cmdclass = cmd.response[1] >> 20;
> +
>  	/* divide frequency by 10, since the mults are 10x bigger */
>  	freq = fbase[(cmd.response[0] & 0x7)];
>  	mult = multipliers[((cmd.response[0] >> 3) & 0xf)];
> @@ -939,7 +941,8 @@ static int mmc_startup(struct mmc *mmc)
>  			capacity *= MMC_MAX_BLOCK_LEN;
>  			if ((capacity >> 20) > 2 * 1024)
>  				mmc->capacity_user = capacity;
> -		}
> +		} else
> +			return COMM_ERR;

Well, I think this point need to consider more.
When error is returned, then this return is right. but it's also satisfied "ext_csd[EXT_CSD_REV] >= 2".

>  
>  		switch (ext_csd[EXT_CSD_REV]) {
>  		case 1:
> @@ -960,6 +963,39 @@ static int mmc_startup(struct mmc *mmc)
>  		}
>  
>  		/*
> +		 * The granularity of the erasable units is the Erase Group:The
> +		 * smallest number of consecutive write blocks which can be
> +		 * addressed for erase. The size of the Erase Group is card
> +		 * specific and stored in the CSD when ERASE_GROUP_DEF is
> +		 * disabled, and in the EXT_CSD when ERASE_GROUP_DEF is
> +		 * enabled.
> +		 */
> +		if (ext_csd[EXT_CSD_ERASE_GROUP_DEF]) {
> +			mmc->erase_grp_size =
> +				ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE] * 1024;
> +
> +			mmc->erase_timeout_mult = 300 *
> +				ext_csd[EXT_CSD_ERASE_TIMEOUT_MULT];
> +		} else {
> +			/* Calculate the group size from the csd value. */
> +			int erase_gsz, erase_gmul;
> +			erase_gsz = (mmc->csd[2] & 0x00007c00) >> 10;
> +			erase_gmul = (mmc->csd[2] & 0x000003e0) >> 5;
> +			mmc->erase_grp_size = (erase_gsz + 1)
> +				* (erase_gmul + 1);
> +		}
> +
> +		if (ext_csd[EXT_CSD_REV] >= 4) {
> +			mmc->sec_feature_support =
> +				ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT];
> +			mmc->sec_erase_mult =
> +				ext_csd[EXT_CSD_SEC_ERASE_MULT];
> +			mmc->sec_erase_timeout = 300 *
> +				ext_csd[EXT_CSD_SEC_ERASE_MULT] *
> +				ext_csd[EXT_CSD_ERASE_TIMEOUT_MULT];
> +		}
> +
> +		/*
>  		 * Host needs to enable ERASE_GRP_DEF bit if device is
>  		 * partitioned. This bit will be lost every time after a reset
>  		 * or power off. This will affect erase size.
> @@ -968,23 +1004,11 @@ static int mmc_startup(struct mmc *mmc)
>  		    (ext_csd[EXT_CSD_PARTITIONS_ATTRIBUTE] & PART_ENH_ATTRIB)) {
>  			err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
>  				EXT_CSD_ERASE_GROUP_DEF, 1);
> -
>  			if (err)
>  				return err;
> -
> -			/* Read out group size from ext_csd */
> -			mmc->erase_grp_size =
> -				ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE] *
> -					MMC_MAX_BLOCK_LEN * 1024;
> -		} else {
> -			/* Calculate the group size from the csd value. */
> -			int erase_gsz, erase_gmul;
> -			erase_gsz = (mmc->csd[2] & 0x00007c00) >> 10;
> -			erase_gmul = (mmc->csd[2] & 0x000003e0) >> 5;
> -			mmc->erase_grp_size = (erase_gsz + 1)
> -				* (erase_gmul + 1);
>  		}
>  
> +

remove the blank.

Best Regards,
Jaehoon Chung

>  		/* store the partition info of emmc */
>  		if ((ext_csd[EXT_CSD_PARTITIONING_SUPPORT] & PART_SUPPORT) ||
>  		    ext_csd[EXT_CSD_BOOT_MULT])
>