From mboxrd@z Thu Jan 1 00:00:00 1970 From: Zhang Haijun Date: Mon, 30 Dec 2013 12:03:29 +0800 Subject: [U-Boot] [PATCH 1/7 V4] mmc: Add some usefull macro definition In-Reply-To: <52BD64A6.1030705@samsung.com> References: <1386663654-14498-1-git-send-email-haijun.zhang@freescale.com> <52BD64A6.1030705@samsung.com> Message-ID: <52C0F091.9010205@freescale.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 12/27/2013 07:29 PM, Jaehoon Chung wrote: > Hi, Haijun. > > On 12/10/2013 05:20 PM, Haijun Zhang wrote: >> From: Haijun Zhang >> >> Add command class define. >> Add mmc erase and secure erase define. >> Add secure erase and trim support bit define. >> >> Signed-off-by: Haijun Zhang >> --- >> changes for V4: >> - no changes >> changes for V3: >> - No changes >> >> include/mmc.h | 50 +++++++++++++++++++++++++++++++++++++++++++++++++- >> 1 file changed, 49 insertions(+), 1 deletion(-) >> >> diff --git a/include/mmc.h b/include/mmc.h >> index cb558da..08f0f3e 100644 >> --- a/include/mmc.h >> +++ b/include/mmc.h >> @@ -53,6 +53,7 @@ >> #define COMM_ERR -18 /* Communications Error */ >> #define TIMEOUT -19 >> #define IN_PROGRESS -20 /* operation is in progress */ >> +#define NOT_SUPPORT -21 /* Operation is not support */ >> >> #define MMC_CMD_GO_IDLE_STATE 0 >> #define MMC_CMD_SEND_OP_COND 1 >> @@ -105,6 +106,39 @@ >> #define OCR_VOLTAGE_MASK 0x007FFF80 >> #define OCR_ACCESS_MODE 0x60000000 >> >> +/* >> + * Card Command Classes (CCC) >> + * >> + * (0) Basic protocol functions (CMD0,1,2,3,4,7,9,10,12,13,15) >> + * (and for SPI, CMD58,59) >> + * (1) Stream read commands (CMD11) >> + * (2) Block read commands (CMD16,17,18) >> + * (3) Stream write commands (CMD20) >> + * (4) Block write commands (CMD16,24,25,26,27) >> + * (5) Ability to erase blocks (CMD32,33,34,35,36,37,38,39) >> + * (6) Able to write protect blocks (CMD28,29,30) >> + * (7) Able to lock down card (CMD16,CMD42) >> + * (8) Application specific (CMD55,56,57,ACMD*) >> + * (9) I/O mode (CMD5,39,40,52,53) >> + * (10) High speed switch (CMD6,34,35,36,37,50) >> + */ >> +#define CCC_BASIC (1<<0) >> +#define CCC_STREAM_READ (1<<1) >> +#define CCC_BLOCK_READ (1<<2) >> +#define CCC_STREAM_WRITE (1<<3) >> +#define CCC_BLOCK_WRITE (1<<4) >> +#define CCC_ERASE (1<<5) >> +#define CCC_WRITE_PROT (1<<6) >> +#define CCC_LOCK_CARD (1<<7) >> +#define CCC_APP_SPEC (1<<8) >> +#define CCC_IO_MODE (1<<9) >> +#define CCC_SWITCH (1<<10) >> + >> +#define MMC_ERASE_ARG 0x00000000 >> +#define MMC_SECURE_ERASE_ARG 0x80000000 >> +#define MMC_TRIM_ARG 0x00000001 >> +#define MMC_DISCARD_ARG 0x00000003 >> + >> #define SECURE_ERASE 0x80000000 >> >> #define MMC_STATUS_MASK (~0x0206BF7F) >> @@ -160,8 +194,12 @@ >> #define EXT_CSD_CARD_TYPE 196 /* RO */ >> #define EXT_CSD_SEC_CNT 212 /* RO, 4 bytes */ >> #define EXT_CSD_HC_WP_GRP_SIZE 221 /* RO */ >> +#define EXT_CSD_REL_WR_SEC_C 222 /* RO */ >> +#define EXT_CSD_ERASE_TIMEOUT_MULT 223 /* RO */ >> #define EXT_CSD_HC_ERASE_GRP_SIZE 224 /* RO */ >> #define EXT_CSD_BOOT_MULT 226 /* RO */ >> +#define EXT_CSD_SEC_ERASE_MULT 230 /* RO */ >> +#define EXT_CSD_SEC_FEATURE_SUPPORT 231 /* RO */ >> >> /* >> * EXT_CSD field definitions >> @@ -178,6 +216,12 @@ >> #define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */ >> #define EXT_CSD_BUS_WIDTH_8 2 /* Card is in 8 bit mode */ >> >> +/* EXT_CSD[231] */ > If you want to add the comment for EXT_CSD[231], > I think good like this. > /* SEC_FEATURE_SUPPORT[231] Field definitions */ > > Best Regards, > Jaehoon Chung Thanks. I'll add this. -- Haijun >> +#define EXT_CSD_SEC_ER_EN (1<<0) >> +#define EXT_CSD_SEC_BD_BLK_EN (1<<2) >> +#define EXT_CSD_SEC_GB_CL_EN (1<<4) >> +#define EXT_CSD_SEC_SANITIZE (1<<6) /* v4.5 later */ >> + >> #define EXT_CSD_BOOT_ACK_ENABLE (1 << 6) >> #define EXT_CSD_BOOT_PARTITION_ENABLE (1 << 3) >> #define EXT_CSD_PARTITION_ACCESS_ENABLE (1 << 0) >> @@ -187,7 +231,6 @@ >> #define EXT_CSD_BOOT_PART_NUM(x) (x << 3) >> #define EXT_CSD_PARTITION_ACCESS(x) (x << 0) >> >> - >> #define R1_ILLEGAL_COMMAND (1 << 22) >> #define R1_APP_CMD (1 << 5) >> >> @@ -268,10 +311,15 @@ struct mmc { >> ushort rca; >> char part_config; >> char part_num; >> + ushort cmdclass; >> uint tran_speed; >> uint read_bl_len; >> uint write_bl_len; >> uint erase_grp_size; >> + uint erase_timeout_mult; >> + char sec_feature_support; >> + uint sec_erase_mult; >> + uint sec_erase_timeout; >> u64 capacity; >> u64 capacity_user; >> u64 capacity_boot; >> > >