public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Minkyu Kang <mk7.kang@samsung.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V3 3/7] arm: exynos: Add get_lcd_clk and set_lcd_clk callbacks for Exynos5420
Date: Thu, 02 Jan 2014 09:39:43 +0900	[thread overview]
Message-ID: <52C4B54F.7010403@samsung.com> (raw)
In-Reply-To: <52C28453.8080705@samsung.com>

On 12/11/13 21:27, Ajay Kumar wrote:
> Add get_lcd_clk and set_lcd_clk callbacks for Exynos5420 needed by

I think, they are not callback functions.

> exynos video driver.
> Also, configure ACLK_400_DISP1 as the parent for MUX_ACLK_400_DISP1_SUB_SEL.
> 
> Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
> ---
>  arch/arm/cpu/armv7/exynos/clock.c         | 74 +++++++++++++++++++++++++++++--
>  arch/arm/cpu/armv7/exynos/exynos5_setup.h |  2 +-
>  arch/arm/include/asm/arch-exynos/clk.h    |  1 +
>  3 files changed, 73 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm/cpu/armv7/exynos/clock.c b/arch/arm/cpu/armv7/exynos/clock.c
> index b52e61a..60ca7ea 100644
> --- a/arch/arm/cpu/armv7/exynos/clock.c
> +++ b/arch/arm/cpu/armv7/exynos/clock.c
> @@ -82,7 +82,8 @@ static int exynos_get_pll_clk(int pllreg, unsigned int r, unsigned int k)
>  	 * VPLL_CON: MIDV [24:16]
>  	 * BPLL_CON: MIDV [25:16]: Exynos5
>  	 */
> -	if (pllreg == APLL || pllreg == MPLL || pllreg == BPLL)
> +	if (pllreg == APLL || pllreg == MPLL ||
> +					pllreg == BPLL || pllreg == SPLL)
>  		mask = 0x3ff;
>  	else
>  		mask = 0x1ff;
> @@ -391,6 +392,9 @@ static unsigned long exynos5420_get_pll_clk(int pllreg)
>  		r = readl(&clk->rpll_con0);
>  		k = readl(&clk->rpll_con1);
>  		break;
> +	case SPLL:
> +		r = readl(&clk->spll_con0);
> +		break;
>  	default:
>  		printf("Unsupported PLL (%d)\n", pllreg);
>  		return 0;
> @@ -1038,6 +1042,40 @@ static unsigned long exynos5_get_lcd_clk(void)
>  	return pclk;
>  }
>  
> +static unsigned long exynos5420_get_lcd_clk(void)
> +{
> +	struct exynos5420_clock *clk =
> +		(struct exynos5420_clock *)samsung_get_base_clock();
> +	unsigned long pclk, sclk;
> +	unsigned int sel;
> +	unsigned int ratio;
> +
> +	/*
> +	 * CLK_SRC_DISP10
> +	 * FIMD1_SEL [4]
> +	 * 0: SCLK_RPLL
> +	 * 1: SCLK_SPLL
> +	 */
> +	sel = readl(&clk->src_disp10);
> +	sel &= (1 << 4);
> +
> +	if (sel)
> +		sclk = get_pll_clk(SPLL);
> +	else
> +		sclk = get_pll_clk(RPLL);
> +
> +	/*
> +	 * CLK_DIV_DISP10
> +	 * FIMD1_RATIO [3:0]
> +	 */
> +	ratio = readl(&clk->div_disp10);
> +	ratio = ratio & 0xf;
> +
> +	pclk = sclk / (ratio + 1);
> +
> +	return pclk;
> +}
> +
>  void exynos4_set_lcd_clk(void)
>  {
>  	struct exynos4_clock *clk =
> @@ -1162,6 +1200,33 @@ void exynos5_set_lcd_clk(void)
>  	writel(cfg, &clk->div_disp1_0);
>  }
>  
> +void exynos5420_set_lcd_clk(void)
> +{
> +	struct exynos5420_clock *clk =
> +		(struct exynos5420_clock *)samsung_get_base_clock();
> +	unsigned int cfg;
> +
> +	/*
> +	 * CLK_SRC_DISP10
> +	 * FIMD1_SEL [4]
> +	 * 0: SCLK_RPLL
> +	 * 1: SCLK_SPLL
> +	 */
> +	cfg = readl(&clk->src_disp10);
> +	cfg &= ~(0x1 << 4);
> +	cfg |= (0 << 4);
> +	writel(cfg, &clk->src_disp10);
> +
> +	/*
> +	 * CLK_DIV_DISP10
> +	 * FIMD1_RATIO		[3:0]
> +	 */
> +	cfg = readl(&clk->div_disp10);
> +	cfg &= ~(0xf << 0);
> +	cfg |= (0 << 0);
> +	writel(cfg, &clk->div_disp10);
> +}
> +
>  void exynos4_set_mipi_clk(void)
>  {
>  	struct exynos4_clock *clk =
> @@ -1657,14 +1722,17 @@ unsigned long get_lcd_clk(void)
>  {
>  	if (cpu_is_exynos4())
>  		return exynos4_get_lcd_clk();
> -	else
> -		return exynos5_get_lcd_clk();
> +	else if (proid_is_exynos5420())

please don't mix cpu_is... and proid_is..
please refer other functions.

> +		return exynos5420_get_lcd_clk();
> +	return exynos5_get_lcd_clk();
>  }
>  
>  void set_lcd_clk(void)
>  {
>  	if (cpu_is_exynos4())
>  		exynos4_set_lcd_clk();
> +	else if (proid_is_exynos5420())
> +		exynos5420_set_lcd_clk();

ditto.

>  	else
>  		exynos5_set_lcd_clk();
>  }
> diff --git a/arch/arm/cpu/armv7/exynos/exynos5_setup.h b/arch/arm/cpu/armv7/exynos/exynos5_setup.h
> index 8e05a00..70b1c04 100644
> --- a/arch/arm/cpu/armv7/exynos/exynos5_setup.h
> +++ b/arch/arm/cpu/armv7/exynos/exynos5_setup.h
> @@ -780,7 +780,7 @@
>  #define CLK_SRC_TOP2_VAL	0x11101000
>  #define CLK_SRC_TOP3_VAL	0x11111111
>  #define CLK_SRC_TOP4_VAL	0x11110111
> -#define CLK_SRC_TOP5_VAL	0x11111100
> +#define CLK_SRC_TOP5_VAL	0x11111101
>  #define CLK_SRC_TOP6_VAL	0x11110111
>  #define CLK_SRC_TOP7_VAL	0x00022200
>  
> diff --git a/arch/arm/include/asm/arch-exynos/clk.h b/arch/arm/include/asm/arch-exynos/clk.h
> index cdeef32..98faae7 100644
> --- a/arch/arm/include/asm/arch-exynos/clk.h
> +++ b/arch/arm/include/asm/arch-exynos/clk.h
> @@ -15,6 +15,7 @@
>  #define VPLL	4
>  #define BPLL	5
>  #define RPLL	6
> +#define SPLL	7
>  
>  enum pll_src_bit {
>  	EXYNOS_SRC_MPLL = 6,
> 

Thanks,
Minkyu Kang.

       reply	other threads:[~2014-01-02  0:39 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <52C28453.8080705@samsung.com>
2014-01-02  0:39 ` Minkyu Kang [this message]
2014-01-02  5:39   ` [U-Boot] [PATCH V3 3/7] arm: exynos: Add get_lcd_clk and set_lcd_clk callbacks for Exynos5420 Ajay kumar
2013-11-12 12:27 [U-Boot] [PATCH V2 0/7] SMDK5420: Add support for FIMD and DP Ajay Kumar
2013-11-12 12:27 ` [U-Boot] [PATCH V3 3/7] arm: exynos: Add get_lcd_clk and set_lcd_clk callbacks for Exynos5420 Ajay Kumar
2013-12-19 20:38   ` Simon Glass

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=52C4B54F.7010403@samsung.com \
    --to=mk7.kang@samsung.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox