From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Thu, 02 Jan 2014 17:19:59 +0100 Subject: [U-Boot] [PATCH v2 3/6] mx6: soc: Set the VDDSOC at 1.175 V In-Reply-To: <1388076695-28174-3-git-send-email-festevam@gmail.com> References: <1388076695-28174-1-git-send-email-festevam@gmail.com> <1388076695-28174-3-git-send-email-festevam@gmail.com> Message-ID: <52C591AF.9070403@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 26/12/2013 17:51, Fabio Estevam wrote: > From: Fabio Estevam > > mx6 datasheet specifies that the minimum VDDSOC at 792 MHz is 1.15 V. > Add a 25 mV margin and set it to 1.175V. > > This also matches the VDDSOC voltages for 792MHz operation that the kernel configures: > http://git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git/tree/arch/arm/mach-mx6/cpu_op-mx6.c?h=imx_3.0.35_4.1.0 > > Signed-off-by: Fabio Estevam > --- Applied to u-boot-imx, thanks ! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================