* [U-Boot] [PATCH][v2] board/freescale:Remove use of CONFIG_SPL_NAND_MINIMAL
@ 2013-12-11 7:12 Prabhakar Kushwaha
2014-01-02 23:43 ` York Sun
2014-01-02 23:45 ` Scott Wood
0 siblings, 2 replies; 3+ messages in thread
From: Prabhakar Kushwaha @ 2013-12-11 7:12 UTC (permalink / raw)
To: u-boot
CONFIG_SPL_NAND_MINIMAL should not be used as it was defined for temporary
review purpose.
So, use CONFIG_SPL_NAND_BOOT config.
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
---
Changes for v2: Incorporated Scott's comments
- Add CONFIG_SPL_NAND_BOOT in README
README | 3 +++
board/freescale/bsc9131rdb/tlb.c | 2 +-
board/freescale/bsc9132qds/tlb.c | 2 +-
board/freescale/p1010rdb/tlb.c | 2 +-
include/configs/BSC9131RDB.h | 2 +-
include/configs/BSC9132QDS.h | 2 +-
include/configs/P1010RDB.h | 2 +-
7 files changed, 9 insertions(+), 6 deletions(-)
diff --git a/README b/README
index 265e81e..88a4722 100644
--- a/README
+++ b/README
@@ -3245,6 +3245,9 @@ FIT uImage format:
Defines the size and behavior of the NAND that SPL uses
to read U-Boot
+ CONFIG_SPL_NAND_BOOT
+ Add support NAND boot
+
CONFIG_SYS_NAND_U_BOOT_OFFS
Location in NAND to read U-Boot from
diff --git a/board/freescale/bsc9131rdb/tlb.c b/board/freescale/bsc9131rdb/tlb.c
index 669fe8a..c8ecf5d 100644
--- a/board/freescale/bsc9131rdb/tlb.c
+++ b/board/freescale/bsc9131rdb/tlb.c
@@ -30,7 +30,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 0, BOOKE_PAGESZ_4K, 1),
-#ifdef CONFIG_SPL_NAND_MINIMAL
+#ifdef CONFIG_SPL_NAND_BOOT
SET_TLB_ENTRY(1, 0xffffe000, 0xffffe000,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 10, BOOKE_PAGESZ_4K, 1),
diff --git a/board/freescale/bsc9132qds/tlb.c b/board/freescale/bsc9132qds/tlb.c
index 02655e9..07febc2 100644
--- a/board/freescale/bsc9132qds/tlb.c
+++ b/board/freescale/bsc9132qds/tlb.c
@@ -30,7 +30,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 0, BOOKE_PAGESZ_4K, 1),
-#ifdef CONFIG_SPL_NAND_MINIMAL
+#ifdef CONFIG_SPL_NAND_BOOT
SET_TLB_ENTRY(1, 0xffffe000, 0xffffe000,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 10, BOOKE_PAGESZ_4K, 1),
diff --git a/board/freescale/p1010rdb/tlb.c b/board/freescale/p1010rdb/tlb.c
index a7af0f6..a3d36b3 100644
--- a/board/freescale/p1010rdb/tlb.c
+++ b/board/freescale/p1010rdb/tlb.c
@@ -30,7 +30,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 0, BOOKE_PAGESZ_4K, 1),
-#ifdef CONFIG_SPL_NAND_MINIMAL
+#ifdef CONFIG_SPL_NAND_BOOT
SET_TLB_ENTRY(1, 0xffffe000, 0xffffe000,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 10, BOOKE_PAGESZ_4K, 1),
diff --git a/include/configs/BSC9131RDB.h b/include/configs/BSC9131RDB.h
index 499d8c2..783d996 100644
--- a/include/configs/BSC9131RDB.h
+++ b/include/configs/BSC9131RDB.h
@@ -29,7 +29,7 @@
#define CONFIG_SPL_INIT_MINIMAL
#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_NAND_MINIMAL
+#define CONFIG_SPL_NAND_BOOT
#define CONFIG_SPL_FLUSH_IMAGE
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h
index a6601fe..f7cd955 100644
--- a/include/configs/BSC9132QDS.h
+++ b/include/configs/BSC9132QDS.h
@@ -38,7 +38,7 @@
#define CONFIG_SPL_INIT_MINIMAL
#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_NAND_MINIMAL
+#define CONFIG_SPL_NAND_BOOT
#define CONFIG_SPL_FLUSH_IMAGE
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h
index eab386a..22538fc 100644
--- a/include/configs/P1010RDB.h
+++ b/include/configs/P1010RDB.h
@@ -37,7 +37,7 @@
#define CONFIG_SPL_INIT_MINIMAL
#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_NAND_MINIMAL
+#define CONFIG_SPL_NAND_BOOT
#define CONFIG_SPL_FLUSH_IMAGE
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
--
1.7.9.5
^ permalink raw reply related [flat|nested] 3+ messages in thread* [U-Boot] [PATCH][v2] board/freescale:Remove use of CONFIG_SPL_NAND_MINIMAL
2013-12-11 7:12 [U-Boot] [PATCH][v2] board/freescale:Remove use of CONFIG_SPL_NAND_MINIMAL Prabhakar Kushwaha
@ 2014-01-02 23:43 ` York Sun
2014-01-02 23:45 ` Scott Wood
1 sibling, 0 replies; 3+ messages in thread
From: York Sun @ 2014-01-02 23:43 UTC (permalink / raw)
To: u-boot
On 12/10/2013 11:12 PM, Prabhakar Kushwaha wrote:
> CONFIG_SPL_NAND_MINIMAL should not be used as it was defined for temporary
> review purpose.
>
> So, use CONFIG_SPL_NAND_BOOT config.
>
> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
> ---
> Changes for v2: Incorporated Scott's comments
> - Add CONFIG_SPL_NAND_BOOT in README
>
Applied to u-boot-mpc85xx/master. Thanks.
York
^ permalink raw reply [flat|nested] 3+ messages in thread
* [U-Boot] [PATCH][v2] board/freescale:Remove use of CONFIG_SPL_NAND_MINIMAL
2013-12-11 7:12 [U-Boot] [PATCH][v2] board/freescale:Remove use of CONFIG_SPL_NAND_MINIMAL Prabhakar Kushwaha
2014-01-02 23:43 ` York Sun
@ 2014-01-02 23:45 ` Scott Wood
1 sibling, 0 replies; 3+ messages in thread
From: Scott Wood @ 2014-01-02 23:45 UTC (permalink / raw)
To: u-boot
On Wed, 2013-12-11 at 12:42 +0530, Prabhakar Kushwaha wrote:
> CONFIG_SPL_NAND_MINIMAL should not be used as it was defined for temporary
> review purpose.
>
> So, use CONFIG_SPL_NAND_BOOT config.
>
> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
> ---
> Changes for v2: Incorporated Scott's comments
> - Add CONFIG_SPL_NAND_BOOT in README
>
> README | 3 +++
> board/freescale/bsc9131rdb/tlb.c | 2 +-
> board/freescale/bsc9132qds/tlb.c | 2 +-
> board/freescale/p1010rdb/tlb.c | 2 +-
> include/configs/BSC9131RDB.h | 2 +-
> include/configs/BSC9132QDS.h | 2 +-
> include/configs/P1010RDB.h | 2 +-
> 7 files changed, 9 insertions(+), 6 deletions(-)
>
> diff --git a/README b/README
> index 265e81e..88a4722 100644
> --- a/README
> +++ b/README
> @@ -3245,6 +3245,9 @@ FIT uImage format:
> Defines the size and behavior of the NAND that SPL uses
> to read U-Boot
>
> + CONFIG_SPL_NAND_BOOT
> + Add support NAND boot
Is it really just adding support for NAND boot, or is it asserting that
we are booting from NAND?
-Scott
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2014-01-02 23:45 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-12-11 7:12 [U-Boot] [PATCH][v2] board/freescale:Remove use of CONFIG_SPL_NAND_MINIMAL Prabhakar Kushwaha
2014-01-02 23:43 ` York Sun
2014-01-02 23:45 ` Scott Wood
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox