From mboxrd@z Thu Jan 1 00:00:00 1970 From: Michal Simek Date: Fri, 03 Jan 2014 11:12:41 +0100 Subject: [U-Boot] [PATCH v4 19/29] zynq: Add zynq_zc770 xm012 board support In-Reply-To: <57ecdd5f-96c0-4f96-ae83-bee6ed14c209@CH1EHSMHS031.ehs.local> References: <1387608475-1627-1-git-send-email-jaganna@xilinx.com> <57ecdd5f-96c0-4f96-ae83-bee6ed14c209@CH1EHSMHS031.ehs.local> Message-ID: <52C68D19.1030706@monstr.eu> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 12/21/2013 07:47 AM, Jagannadha Sutradharudu Teki wrote: > ZC770 is a complete development board based on the Xilinx Zynq-7000 > All Programmable SoC, similar to ZC70x board but which has four > different daughter cards, like XM010, XM011, XM012 and XM013 > > ZC770 XM012: > - 1GB DDR3 > - 64MiB Numonyx NOR flash > - USB-UART > > Signed-off-by: Jagannadha Sutradharudu Teki > Cc: Stefan Roese > --- > V4: Removed CONFIG_SYS_NO_FLASH in zynq-common.h > V3: none > V2: none ok. I have looked at this whole series and I think it is step back. We should rather do step forward and start to use device-tree initialization. I have sent some patches for it here http://lists.denx.de/pipermail/u-boot/2014-January/170051.html Thanks, Michal -- Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/ Maintainer of Linux kernel - Xilinx Zynq ARM architecture Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 263 bytes Desc: OpenPGP digital signature URL: