[U-Boot] [PATCH 1/2] configs: mx6_common: Restrict CONFIG_ARM_ERRATA_742230 for multi-core

[Stefano Babic <sbabic@denx.de>]

Hi Fabio,

On 06/01/2014 14:14, Fabio Estevam wrote:
> According to e9fd66defd (ARM: mx6: define CONFIG_ARM_ERRATA_742230), the 
> CONFIG_ARM_ERRATA_742230 option should only be applied to multi-core
> variants, so restrict its usage for quad and dual-lite only.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---
>  include/configs/mx6_common.h | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h
> index 514d634..0b8db85 100644
> --- a/include/configs/mx6_common.h
> +++ b/include/configs/mx6_common.h
> @@ -17,7 +17,9 @@
>  #ifndef __MX6_COMMON_H
>  #define __MX6_COMMON_H
>  
> +#if defined(CONFIG_MX6Q) ||  defined(CONFIG_MX6DL)
>  #define CONFIG_ARM_ERRATA_742230
> +#endif
>  #define CONFIG_ARM_ERRATA_743622
>  #define CONFIG_ARM_ERRATA_751472
>  #define CONFIG_BOARD_POSTCLK_INIT
> 

In Kernel I cannot read that the errata is related to a multicore
processor. Indeed, it is related to the Cortex-A9 version.

"This option enables the workaround for the 742230 Cortex-A9
 (r1p0..r2p2) erratum. Under rare circumstances, a DMB instruction
  between two write operations may not ensure the correct visibility
  ordering of the two writes. This workaround sets a specific bit in
  the diagnostic register of the Cortex-A9 which causes the DMB
  instruction to behave as a DSB, ensuring the correct behaviour of
  the two writes.
"

The fix was merged in kernel since a lot of time, before having
multicore processors for ARM. At least the commit message does not seem
coherent with the explanations in kernel. Maybe has solo a upgraded core
version as dual/quad ?

Best regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================