[U-Boot] Fwd: Re: Boot Linux kernel with initramfs fails

[Jean-baptiste DURONEA <jbduro2@gmail.com>]

Dear Wolfgang Denk,

I forgot some explanations, sorry about that.

I refer to this problem :
http://lists.denx.de/pipermail/u-boot/2013-July/159055.html

First, I tried to boot linux with initramfs through u-boot, but I had
the same problem explained in my first post.

Here is a part of the config file used by my -boot :

  /* High Level Configuration Options */
#define CONFIG_ARMV7    /* This is armv7 Cortex-A9 CPU core */
#define CONFIG_MXC
#define CONFIG_MX6DL
#define CONFIG_MX6DL_DDR3
#define CONFIG_MX6DL_SABRESD
#define CONFIG_DDR_32BIT
#define CONFIG_FLASH_HEADER
#define CONFIG_FLASH_HEADER_OFFSET 0x400
#define CONFIG_MX6_CLK32       32768

/* Disable secure boot feature in default, if you want to enable this
  * feature, please carefully read related documents, you may needs to
  * change u-boot.lds */
#undef CONFIG_SECURE_BOOT

#define CONFIG_SKIP_RELOCATE_UBOOT

#define CONFIG_ARCH_CPU_INIT
#undef CONFIG_ARCH_MMU /* disable MMU first */
#define CONFIG_L2_OFF  /* disable L2 cache first*/

#define CONFIG_MX6_HCLK_FREQ    24000000

#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO

#define CONFIG_SYS_64BIT_VSPRINTF

#define BOARD_LATE_INIT

#define CONFIG_CMDLINE_TAG    /* enable passing of ATAGs */
#define CONFIG_SERIAL_TAG
#define CONFIG_REVISION_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_MXC_GPIO

initramfs is loaded in ram at 0x10C00000 by mfgtools, which is the
freescales's manufacturing tool.

I don't know which configuration I need to set on u-boot to tell him
initramfs is at address 0x10C00000, and consequently it hands on linux.

  I am really bloqued on this problem.
Can you give me some hints ?


Tanks a lot !

Regards,


Le 17/01/2014 07:16, Wolfgang Denk a ?crit :
> Dear Jean-baptiste DURONEA,
>
> In message <52D7D2F7.2050307@gmail.com> you wrote:
>> We made a custom board based on imx6solo.
>> I have the same problem !
> The same problem as what or who?  I cannot even guess...
>
>> I have some trouble booting linux kernel with initramfs. I built linux
>> kernel with CONFIG_BLK_DEV_INITRD, so Kbuild generates
>> usr/initramfs_data.cpio which is integrated into the kernel.
> ...
> ...
>> My kernel hangs after the last line, instead of doing "Freeing init
>> memory: ..." but I don't know if it comes from the same problem or not...
> Sorry, but I cannot see anything in your posting which might even
> remotely be related to U-Boot.  This is the U-Boot mailing list - your
> question is off topic here.
>
> Best regards,
>
> Wolfgang Denk
>