* [U-Boot] [PATCH] nitrogen6x: README: Do not refer to MAINTAINERS file
@ 2014-01-24 11:27 Fabio Estevam
2014-01-24 14:04 ` Eric Nelson
2014-01-26 14:19 ` Stefano Babic
0 siblings, 2 replies; 3+ messages in thread
From: Fabio Estevam @ 2014-01-24 11:27 UTC (permalink / raw)
To: u-boot
From: Fabio Estevam <fabio.estevam@freescale.com>
MAINTAINERS file has been removed from the project.
Replace its reference with 'boards.cfg' file instead.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
board/boundary/nitrogen6x/README | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/board/boundary/nitrogen6x/README b/board/boundary/nitrogen6x/README
index 6f449be..9d84265 100644
--- a/board/boundary/nitrogen6x/README
+++ b/board/boundary/nitrogen6x/README
@@ -70,7 +70,7 @@ To build U-Boot for one of the Nitrogen6x or SabreLite board:
make
Note that 'nitrogen6x' is a placeholder. The complete list of supported
-board configurations is shown in tha MAINTAINERS file:
+board configurations is shown in the boards.cfg file:
nitrogen6q i.MX6Q/6D 1GB
nitrogen6dl i.MX6DL 1GB
nitrogen6s i.MX6S 512MB
--
1.8.1.2
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [U-Boot] [PATCH] nitrogen6x: README: Do not refer to MAINTAINERS file
2014-01-24 11:27 [U-Boot] [PATCH] nitrogen6x: README: Do not refer to MAINTAINERS file Fabio Estevam
@ 2014-01-24 14:04 ` Eric Nelson
2014-01-26 14:19 ` Stefano Babic
1 sibling, 0 replies; 3+ messages in thread
From: Eric Nelson @ 2014-01-24 14:04 UTC (permalink / raw)
To: u-boot
On 01/24/2014 04:27 AM, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@freescale.com>
>
> MAINTAINERS file has been removed from the project.
>
> Replace its reference with 'boards.cfg' file instead.
>
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---
> board/boundary/nitrogen6x/README | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/board/boundary/nitrogen6x/README b/board/boundary/nitrogen6x/README
> index 6f449be..9d84265 100644
> --- a/board/boundary/nitrogen6x/README
> +++ b/board/boundary/nitrogen6x/README
> @@ -70,7 +70,7 @@ To build U-Boot for one of the Nitrogen6x or SabreLite board:
> make
>
> Note that 'nitrogen6x' is a placeholder. The complete list of supported
> -board configurations is shown in tha MAINTAINERS file:
> +board configurations is shown in the boards.cfg file:
> nitrogen6q i.MX6Q/6D 1GB
> nitrogen6dl i.MX6DL 1GB
> nitrogen6s i.MX6S 512MB
>
Acked-by: Eric Nelson <eric.nelson@boundarydevices.com>
^ permalink raw reply [flat|nested] 3+ messages in thread
* [U-Boot] [PATCH] nitrogen6x: README: Do not refer to MAINTAINERS file
2014-01-24 11:27 [U-Boot] [PATCH] nitrogen6x: README: Do not refer to MAINTAINERS file Fabio Estevam
2014-01-24 14:04 ` Eric Nelson
@ 2014-01-26 14:19 ` Stefano Babic
1 sibling, 0 replies; 3+ messages in thread
From: Stefano Babic @ 2014-01-26 14:19 UTC (permalink / raw)
To: u-boot
Hi Fabio,
On 24/01/2014 12:27, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@freescale.com>
>
> MAINTAINERS file has been removed from the project.
>
> Replace its reference with 'boards.cfg' file instead.
>
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2014-01-26 14:19 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-01-24 11:27 [U-Boot] [PATCH] nitrogen6x: README: Do not refer to MAINTAINERS file Fabio Estevam
2014-01-24 14:04 ` Eric Nelson
2014-01-26 14:19 ` Stefano Babic
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).