From mboxrd@z Thu Jan  1 00:00:00 1970
From: Timur Tabi <timur@tabi.org>
Date: Sat, 25 Jan 2014 21:22:30 -0600
Subject: [U-Boot] [PATCH] Powerpc/QE: Add QE support for T1040
In-Reply-To: <4e0170e7c9784df18c5570613134db6d@BY2PR03MB348.namprd03.prod.outlook.com>
References: <1390554349-41470-1-git-send-email-B45475@freescale.com>
	<CAOZdJXXiZX2=0VGoePxPvnwXw5nGP9uddO=1hG_z-Pvenm7kJw@mail.gmail.com>
	<4e0170e7c9784df18c5570613134db6d@BY2PR03MB348.namprd03.prod.outlook.com>
Message-ID: <52E47F76.8050108@tabi.org>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

qiang.zhao at freescale.com wrote:
> CONFIG_SYS_QE_FMAN_FW_ADDR is used for Fman microcode while CONFIG_SYS_QE_UCODE_FW_ADDR used
> For QE microcode.

No, CONFIG_SYS_QE_FMAN_FW_ADDR is used for both QE and Fman microcode. 
That's why it says "QE_FMAN" in it.  This is documented in the README.