From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefan Roese Date: Wed, 29 Jan 2014 09:36:27 +0100 Subject: [U-Boot] [PATCH] ventana: Add Gateworks Ventana family support In-Reply-To: <52E8B9A0.8090206@denx.de> References: <1390329660-2448-1-git-send-email-tharvey@gateworks.com> <52E66F88.9010002@denx.de> <52E7846D.50601@denx.de> <52E8B9A0.8090206@denx.de> Message-ID: <52E8BD8B.1080609@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Stefano, On 29.01.2014 09:19, Stefano Babic wrote: >> It appears the only other mainlined IMX6 bootloader to support NAND is >> the Titanium and there is no README for it at all. If there were, I >> would expect it to say pretty much the same thing that my proposed >> Ventana README states. There was a comment by Fabio on original >> titanium patch to include a README explaining how to flash and boot >> from NAND but it apparently didn't make it in: >> http://thread.gmane.org/gmane.comp.boot-loaders.u-boot/158436/focus=158441 > > Good point. Stefan, how do you flash the titanium ? At the moment I do > not see any other way as using the kobs-ng. Or do you have some early > improvement for mkimage adding the FCB/DBBT data ? No. As already mentioned in my previous mail, I also used kobs-ng via Linux to flash the NAND booting image. Thanks, Stefan