[U-Boot] [PATCH v2 3/9] kmp204x: I2C deblocking for I2C-bus1 added

[York Sun <yorksun@freescale.com>]

On 01/27/2014 02:49 AM, Valentin Longchamp wrote:
> From: Rainer Boschung <rainer.boschung@keymile.com>
> 
> -uses common deblocking algorithm from ../common/common.c

I don't see any algorithm in the common.c file.

> -supports deblocking of of  I2C-bus1 by means of QRIO GPIO
>   - SCL1 = GPIO_A16
>   - SDA1 = GPIO_A17
> 
> QRIO GPIOs act in an open-drain-like manner, for 0 GPIO drives
> low and for 1 the GPIO is an input and must be pulled up externaly!
> 
> Signed-off-by: Rainer Boschung <rainer.boschung@keymile.com>
> Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
> ---
> 
> Changes in v2: None
> 
>  board/keymile/kmp204x/kmp204x.c     | 53 ++++++++++++++++++++++++++++++++++---
>  include/configs/km/kmp204x-common.h | 10 +++++++
>  2 files changed, 60 insertions(+), 3 deletions(-)
> 
> diff --git a/board/keymile/kmp204x/kmp204x.c b/board/keymile/kmp204x/kmp204x.c
> index bbb2453..8d6eecb 100644
> --- a/board/keymile/kmp204x/kmp204x.c
> +++ b/board/keymile/kmp204x/kmp204x.c
> @@ -33,12 +33,51 @@ int checkboard(void)
>  	return 0;
>  }
>  
> -/* TODO: implement the I2C deblocking function */
> -int i2c_make_abort(void)
> +/* I2C deblocking uses the algorithm defined in ../common/common.c, which
> + * makes use of 2 QRIO GPIOs to act on the SCL and SDA signals of an I2C bus.
> + * According to the standard I2C IOs must not drive HI-Levels, so the
> + * QRIO GPIOs are used in open-drain fashion:
> + *  -> 0 GPIO configured as output that drives low
> + *  -> 1 GPIO configured as input pull-up ties high
> + */
> +

I failed to understand these comments as well. Are these comments copy-n-paste?

York