[U-Boot] [PATCH 3/9] video:exynos_fb:fdt: add additional fdt data

[Minkyu Kang <mk7.kang@samsung.com>]

On 27/01/14 23:15, Piotr Wilczek wrote:
> This patch adds additional data parsing from DTB.
> 
> Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
> Cc: Minkyu Kang <mk7.kang@samsung.com>
> ---
>  drivers/video/exynos_fb.c |   19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)
> 
> diff --git a/drivers/video/exynos_fb.c b/drivers/video/exynos_fb.c
> index d4863e8..7e0099f 100644
> --- a/drivers/video/exynos_fb.c
> +++ b/drivers/video/exynos_fb.c
> @@ -20,6 +20,7 @@
>  #include <asm/arch/dp_info.h>
>  #include <asm/arch/system.h>
>  #include <asm-generic/errno.h>
> +#include <libtizen.h>
>  
>  #include "exynos_fb.h"
>  
> @@ -269,6 +270,21 @@ int exynos_fimd_parse_dt(const void *blob)
>  	panel_info.dual_lcd_enabled = fdtdec_get_int(blob, node,
>  						"samsung,dual-lcd-enabled", 0);
>  
> +	panel_info.logo_on = fdtdec_get_int(blob, node,
> +						"samsung,logo-on", 0);

duplicated.

> +
> +	panel_info.resolution = fdtdec_get_int(blob, node,
> +						"samsung,resolution", 0);
> +
> +	panel_info.rgb_mode = fdtdec_get_int(blob, node,
> +						"samsung,rgb-mode", 0);
> +
> +	panel_info.power_on_delay = fdtdec_get_int(blob, node,
> +						"samsung,power-on-delay", 0);
> +
> +#ifdef CONFIG_TIZEN
> +	get_tizen_logo_info(&panel_info);

It looks strange.
Why you load the logo at frame buffer driver?

> +#endif
>  	return 0;
>  }
>  #endif
> @@ -281,6 +297,9 @@ void lcd_ctrl_init(void *lcdbase)
>  #ifdef CONFIG_OF_CONTROL
>  	if (exynos_fimd_parse_dt(gd->fdt_blob))
>  		debug("Can't get proper panel info\n");
> +#ifdef CONFIG_EXYNOS_MIPI_DSIM
> +	exynos_init_dsim_platform_data(&panel_info);
> +#endif
>  #else
>  	/* initialize parameters which is specific to panel. */
>  	init_panel_info(&panel_info);
> 

Thanks,
Minkyu Kang.