* [U-Boot] i.MX6Q board with DDR3 on a DIMM slot
@ 2014-02-08 14:18 Ivan Fildichev
0 siblings, 0 replies; only message in thread
From: Ivan Fildichev @ 2014-02-08 14:18 UTC (permalink / raw)
To: u-boot
Hello all,
I am currently working on a custom board based on i.MX6Q processor. The
unusual thing about this board is that the DDR3 is replaceable - it is
not soldered to the board. My problem is that I need U-Boot to
initialize and calibrate this memory. Any help and suggestions are welcome!
Thank you!
Ivan
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2014-02-08 14:18 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-02-08 14:18 [U-Boot] i.MX6Q board with DDR3 on a DIMM slot Ivan Fildichev
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox