From mboxrd@z Thu Jan  1 00:00:00 1970
From: Ivan Fildichev <i.fildichev@smartmodule.ch>
Date: Sat, 08 Feb 2014 16:18:56 +0200
Subject: [U-Boot] i.MX6Q board with DDR3 on a DIMM slot
Message-ID: <52F63CD0.90205@smartmodule.ch>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hello all,

I am currently working on a custom board based on i.MX6Q processor. The 
unusual thing about this board is that the DDR3 is replaceable - it is 
not soldered to the board. My problem is that I need U-Boot to 
initialize and calibrate this memory. Any help and suggestions are welcome!

Thank you!
Ivan