From: Bo Shen <voice.shen@atmel.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] ARM: atmel: add sama5d3 Xplained board support
Date: Mon, 10 Feb 2014 11:25:35 +0800 [thread overview]
Message-ID: <52F846AF.10007@atmel.com> (raw)
In-Reply-To: <20140209111328.A272D380ECC@gemini.denx.de>
Hi Wolfgang Denk,
On 02/09/2014 07:13 PM, Wolfgang Denk wrote:
> Dear Bo Shen,
>
> In message <1391932359-23520-1-git-send-email-voice.shen@atmel.com> you wrote:
>> Add sama5d3 Xplained board support which use Atmel SAMA5D36 SoC.
>> Now it supports boot from NAND flash and SD/MMC card.
>> Features support:
>> - NAND flash
>> - SD/MMC card
>> - Two USB hosts
>> - Ethernet (one GMAC, one EMAC)
>>
>> Signed-off-by: Bo Shen <voice.shen@atmel.com>
>> ---
>>
>> board/atmel/sama5d3_xplained/Makefile | 15 ++
>> board/atmel/sama5d3_xplained/sama5d3_xplained.c | 130 +++++++++++++++
>> boards.cfg | 2 +
>> include/configs/sama5d3_xplained.h | 203 ++++++++++++++++++++++++
>> 4 files changed, 350 insertions(+)
>> create mode 100644 board/atmel/sama5d3_xplained/Makefile
>> create mode 100644 board/atmel/sama5d3_xplained/sama5d3_xplained.c
>> create mode 100644 include/configs/sama5d3_xplained.h
>
> Can we please stop using the SoC name in the board config name? The
> board name is just that: the name of the board.
>
> Please rename all sama5d3_xplained => xplained
This board name is "SAMA5D3 Xplained", while not "Xplained". Using two
words as a total as this board name. For the source code, we use low
case for these two words and connect with underscore. I think no need to
rename.
> Thanks.
>
> Best regards,
>
> Wolfgang Denk
>
Best Regards,
Bo Shen
next prev parent reply other threads:[~2014-02-10 3:25 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-09 7:52 [U-Boot] [PATCH] ARM: atmel: add sama5d3 Xplained board support Bo Shen
2014-02-09 11:13 ` Wolfgang Denk
2014-02-10 3:25 ` Bo Shen [this message]
2014-03-09 18:43 ` [U-Boot] " Andreas Bießmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52F846AF.10007@atmel.com \
--to=voice.shen@atmel.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox