From: York Sun <yorksun@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] Fwd: [PATCH 3/3] armv8/cache: Change cache invalidate and flush function
Date: Mon, 10 Feb 2014 13:58:54 -0800 [thread overview]
Message-ID: <52F94B9E.6090403@freescale.com> (raw)
In-Reply-To: <1392069354-24578-3-git-send-email-yorksun@freescale.com>
-------- Original Message --------
Subject: [PATCH 3/3] armv8/cache: Change cache invalidate and flush function
Date: Mon, 10 Feb 2014 13:55:54 -0800
From: York Sun <yorksun@freescale.com>
To: <albert.u.boot@aribaud.net>
CC: <scottwood@freescale.com>, York Sun <yorksun@freescale.com>, David Feng
<fenghua@phytium.com.cn>
When SoC first boots up, we should invalidate the cache but not flush it.
We can use the same function for invalid and flush mostly, with a wrapper.
Invalidating large cache can ben slow on emulator, so we postpone doing
so until I-cache is enabled, and before enabling D-cache.
Signed-off-by: York Sun <yorksun@freescale.com>
CC: David Feng <fenghua@phytium.com.cn>
---
arch/arm/cpu/armv8/cache.S | 53 +++++++++++++++++++++++++++++------------
arch/arm/cpu/armv8/cache_v8.c | 2 +-
arch/arm/cpu/armv8/start.S | 2 +-
arch/arm/include/asm/system.h | 1 +
4 files changed, 41 insertions(+), 17 deletions(-)
diff --git a/arch/arm/cpu/armv8/cache.S b/arch/arm/cpu/armv8/cache.S
index 546a83e..249799c 100644
--- a/arch/arm/cpu/armv8/cache.S
+++ b/arch/arm/cpu/armv8/cache.S
@@ -19,11 +19,12 @@
* clean and invalidate one level cache.
*
* x0: cache level
- * x1~x9: clobbered
+ * x1: 0 flush & invalidate, 1 invalidate only
+ * x2~x9: clobbered
*/
ENTRY(__asm_flush_dcache_level)
- lsl x1, x0, #1
- msr csselr_el1, x1 /* select cache level */
+ lsl x12, x0, #1
+ msr csselr_el1, x12 /* select cache level */
isb /* sync change of cssidr_el1 */
mrs x6, ccsidr_el1 /* read the new cssidr_el1 */
and x2, x6, #7 /* x2 <- log2(cache line size)-4 */
@@ -35,7 +36,7 @@ ENTRY(__asm_flush_dcache_level)
clz w5, w4 /* bit position of #ways */
mov x4, #0x7fff
and x4, x4, x6, lsr #13 /* x4 <- max number of #sets */
- /* x1 <- cache level << 1 */
+ /* x12 <- cache level << 1 */
/* x2 <- line length offset */
/* x3 <- number of cache ways - 1 */
/* x4 <- number of cache sets - 1 */
@@ -45,11 +46,14 @@ loop_set:
mov x6, x3 /* x6 <- working copy of #ways */
loop_way:
lsl x7, x6, x5
- orr x9, x1, x7 /* map way and level to cisw value */
+ orr x9, x12, x7 /* map way and level to cisw value */
lsl x7, x4, x2
orr x9, x9, x7 /* map set number to cisw value */
- dc cisw, x9 /* clean & invalidate by set/way */
- subs x6, x6, #1 /* decrement the way */
+ tbz w1, #0, 1f
+ dc isw, x9
+ b 2f
+1: dc cisw, x9 /* clean & invalidate by set/way */
+2: subs x6, x6, #1 /* decrement the way */
b.ge loop_way
subs x4, x4, #1 /* decrement the set */
b.ge loop_set
@@ -58,11 +62,14 @@ loop_way:
ENDPROC(__asm_flush_dcache_level)
/*
- * void __asm_flush_dcache_all(void)
+ * void __asm_flush_dcache_all(int invalidate_only)
+ *
+ * x0: 0 flush & invalidate, 1 invalidate only
*
* clean and invalidate all data cache by SET/WAY.
*/
-ENTRY(__asm_flush_dcache_all)
+ENTRY(__asm_dcache_all)
+ mov x1, x0
dsb sy
mrs x10, clidr_el1 /* read clidr_el1 */
lsr x11, x10, #24
@@ -76,13 +83,13 @@ ENTRY(__asm_flush_dcache_all)
/* x15 <- return address */
loop_level:
- lsl x1, x0, #1
- add x1, x1, x0 /* x0 <- tripled cache level */
- lsr x1, x10, x1
- and x1, x1, #7 /* x1 <- cache type */
- cmp x1, #2
+ lsl x12, x0, #1
+ add x12, x12, x0 /* x0 <- tripled cache level */
+ lsr x12, x10, x12
+ and x12, x12, #7 /* x12 <- cache type */
+ cmp x12, #2
b.lt skip /* skip if no cache or icache */
- bl __asm_flush_dcache_level
+ bl __asm_flush_dcache_level /* x1 = 0 flush, 1 invalidate */
skip:
add x0, x0, #1 /* increment cache level */
cmp x11, x0
@@ -96,8 +103,24 @@ skip:
finished:
ret
+ENDPROC(__asm_dcache_all)
+
+ENTRY(__asm_flush_dcache_all)
+ mov x16, lr
+ mov x0, #0
+ bl __asm_dcache_all
+ mov lr, x16
+ ret
ENDPROC(__asm_flush_dcache_all)
+ENTRY(__asm_invalidate_dcache_all)
+ mov x16, lr
+ mov x0, #0xffff
+ bl __asm_dcache_all
+ mov lr, x16
+ ret
+ENDPROC(__asm_invalidate_dcache_all)
+
/*
* void __asm_flush_dcache_range(start, end)
*
diff --git a/arch/arm/cpu/armv8/cache_v8.c b/arch/arm/cpu/armv8/cache_v8.c
index 7acae1b..3ce391ea 100644
--- a/arch/arm/cpu/armv8/cache_v8.c
+++ b/arch/arm/cpu/armv8/cache_v8.c
@@ -80,7 +80,7 @@ static void mmu_setup(void)
*/
void invalidate_dcache_all(void)
{
- __asm_flush_dcache_all();
+ __asm_invalidate_dcache_all();
}
/*
diff --git a/arch/arm/cpu/armv8/start.S b/arch/arm/cpu/armv8/start.S
index e70c51d..7b9ac21 100644
--- a/arch/arm/cpu/armv8/start.S
+++ b/arch/arm/cpu/armv8/start.S
@@ -65,9 +65,9 @@ reset:
0:
/* Cache/BPB/TLB Invalidate */
- bl __asm_flush_dcache_all /* dCache clean&invalidate */
bl __asm_invalidate_icache_all /* iCache invalidate */
bl __asm_invalidate_tlb_all /* invalidate TLBs */
+ /* d-cache invalidation is done before enabling d-cache */
/* Processor specific initialization */
bl lowlevel_init
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index 4178f8c..74ee9a4 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -66,6 +66,7 @@ static inline void set_sctlr(unsigned int val)
}
void __asm_flush_dcache_all(void);
+void __asm_invalidate_dcache_all(void);
void __asm_flush_dcache_range(u64 start, u64 end);
void __asm_invalidate_tlb_all(void);
void __asm_invalidate_icache_all(void);
--
1.7.9.5
next prev parent reply other threads:[~2014-02-10 21:58 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1392069354-24578-1-git-send-email-yorksun@freescale.com>
2014-02-10 21:58 ` [U-Boot] Fwd: [PATCH 1/3] armv8/cache: Consolidate setting for MAIR and TCR York Sun
[not found] ` <1392069354-24578-3-git-send-email-yorksun@freescale.com>
2014-02-10 21:58 ` York Sun [this message]
[not found] ` <4997fa.12c4.144296ae1fc.Coremail.fenghua@phytium.com.cn>
2014-02-13 17:29 ` [U-Boot] [PATCH 3/3] armv8/cache: Change cache invalidate and flush function York Sun
2014-02-13 3:13 ` [U-Boot] [PATCH 1/3] armv8/cache: Consolidate setting for MAIR and TCR FengHua
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52F94B9E.6090403@freescale.com \
--to=yorksun@freescale.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox